Re: [CAD_CAM_EDM_DRO] Re: DYNA 2400 SOFTWARE

Jeff,

Dyna expecting a line feed after a line of code. It doesn't sends signal back to your computer (I monitored this process on the R232 breakout box). It's waiting for codes and increment on the controller as data being sent from your program. The rate is 2400-8-1, if this help. On MasterCam you can start from 000 and increment the step +1 on the post process.


net> wrote:
I just added the serial cable wiring diagram out of the Dyna 2400
mill book to the DynaComm folder in the files section. It's a
standard cable with CTS and RTS wired together. I also confirmed
today that DynaComm will work on Win98-XP but you must have the .NET
framework installed. It's about a 23MB free download from
Microsoft. I've got a line execute mode partially working, I just
don't seem to be getting any data back from the Dyna saying it's
ready for the next line of code. When this is working it will allow
programs longer than 900 lines to be run by feeding them one at a
time from the computer. I've also notice that MasterCam
automatically starts the line numbers over at 000 when you go over
900.

Jeff



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

[Non-text portions of this message have been removed]