Re: [CAD_CAM_EDM_DRO] Re: DYNA 2400 SOFTWARE

Jeff,

What would be cool is to strip out their's component and replace it with other stepper controller such as Xylotex and use your .Net program.

Ben

birt_j@...> wrote:
I think I may have created some confusion with my last post by
talking about two diffrent types of software. The Firmware I
mentioned is in the form of two EPROM chips that must be purchased
from DynaMechatronics for $150.00. This is the software for a Dyna
2400c controller.

The second piece of software I talked about was DynaComm which is a
piece of software I'm writing to becom familiar with VB.NET and the
Dyna mill. DynaComm is in the public domain,I wrote it and you can
use it for free if you want to. It's basically a download / DNC
utility for a Dyna Mill or lathe, but the DNC part does not work yet.

As a matter of fact if anyone else has a mill or something that
accepts programs over a serial link and has the communication specs
I may even try and make it work for that too.

Sorry for the confusion.

Jeff Birt


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jeff_birt2000"
wrote:

>
> I recieved the backup batteries from DyanMechtronics today and
> installed them. It made no apparent diffrent to the operation of
> Line Execute mode. I did find out from Dyna that a newer firmware
> level was available so I orderd it. Not cheap at $150. The

checksum

> of the version I had was 15fc and the latest for it is 4859.

We'll

> see if it makes a difference.
>
> I have posted DynaComm Version 1.1 in the files section. This
> verison includes an editing window for the CNC program and a few
> other cosmetic improvements. The Line execute is still disabled

due

> to my 2400 not working properly with it. Once again, you must

have

> the .NET frame work installed to run this program which is a free
> download from windowsupdate.com
>
> I also found out these Dyna controllers will run in a 'Block

execute

> mode' which downloads untill a SKIP TO 900 is encounterd and then
> waits for the next block of code to be downloaded. There does not
> appear to be any handshaking between blocks so you have to wait

and

> then manually download the next block.
>
> Has anyone out there actually ran one of these in line execute

mode

> correctly?
>
> Jeff Birt
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "jeff_birt2000"

> wrote:
> > David,
> >
> > I wound up ordering the batteries (the one in the dm3000 lath
> > controller was low too) from Dyna before seeing you note. They

are

> > $38.00 from Dyna.
> >
> > I tried replacing the previous code to generate an arc with an

ARC

> > frame but have the same problem; it works great when the whole
> > program is downloaded but goes crazey in line execute mode. I

also

> > found some paperwork yesterday indicating there may be a 'Block
> > Execute mode' available with the correct firmware version. I'll
> call
> > Dyna and inquire.
> >
> > Jeff

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



---------------------------------
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search

[Non-text portions of this message have been removed]