Re: DYNA 2400 SOFTWARE

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "mrdavidpontes"
<mrdavidpontes@a...> wrote:

> --- Hi Jeff,

The Dyna control communicates to the distribution board via a serial
link. I'm guessing the control figures out what the next set of
steps for the steppers are and tells the distribution board which
controlls the stepper drivers. So in theory one could remove the
controller and serially communicate with the distribution board
directly. Of course you would have to know the protocall and wite
the software on the PC. This program would have nothing to do with
whats stored on the EPROMS for the Dyna controller. You could even
make you new PC controller understand any flavor of CNC code you
wanted. But, alas this is all theory and I'll be happy with getting
my download program to work with the existing controller.

BTW, what problem are you having with your controller?

Jeff

>
> On your comments about changing the control,the unit is
> only a micro control. It would be the prolblem of interface to the
> PC,and copping the EPROM's programs to a hard drive and in a

format

> that the computer could use. I do not how I would do this, sound

like

> a good idea. On the stepper controls, I was told that they were

made

> by ADVANCE MOTOION CONTROLS for DYNA, I don't know this for a fact.
>
> Myself' I am going to try to repair my controler,and see if I

can

> get to "remember" all the time,then I can use it for what I BOUGHT

IT

> FOR , MAKING TRAINS!
>
> david pontes
> mrdavidpontes@c...