CAD CAM EDM DRO - Yahoo Group Archive

Re: And UHMW is fine too! - UHMW - buttons

on 2003-10-05 08:07:33 UTC
> Yes, UHMW plane bearings are best made thin, though I did have
> success once years ago in block form(but I added teflon
> gib "buttons").


Interesting. I recently had to add a couple setscrews to a guide to
get rid of the play. I drilled and tapped and used nylon screws.

Seems to be working.

For a larger section, I was thinking of putting asmall ball in the
hole, putting in a screw and pressure forming the nylon, then
releasing the pressure and snugging to a slip fit.

Dave

Discussion Thread

camfambmw540 2003-10-03 07:59:31 UTC Using a porter cable router to cut aluminum Tyson S. 2003-10-03 09:25:06 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Tim Goldstein 2003-10-03 09:56:38 UTC RE: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Jon Elson 2003-10-03 10:27:24 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum camfambmw540 2003-10-03 12:01:16 UTC Re: Using a porter cable router to cut aluminum camfambmw540 2003-10-03 12:04:00 UTC Re: Using a porter cable router to cut aluminum Tyson S. 2003-10-04 07:47:25 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum R Rogers 2003-10-04 07:50:15 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Jon Elson 2003-10-04 22:35:20 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum ballendo 2003-10-05 05:06:43 UTC Works fine ! Re: Using a porter cable router to cut aluminum ballendo 2003-10-05 05:19:24 UTC Re: Using a porter cable router to cut aluminum ballendo 2003-10-05 05:26:21 UTC Re: Using a porter cable router to cut aluminum ballendo 2003-10-05 05:40:25 UTC And UHMW is fine too! was Re: Using a porter cable router to cut aluminum ballendo 2003-10-05 05:50:08 UTC Re: Using a porter cable router to cut aluminum turbulatordude 2003-10-05 06:36:14 UTC And UHMW is fine too! - UHMW turbulatordude 2003-10-05 06:45:09 UTC Re: Using a porter cable router to cut aluminum ballendo 2003-10-05 07:58:33 UTC Re: And UHMW is fine too! - UHMW turbulatordude 2003-10-05 08:07:33 UTC Re: And UHMW is fine too! - UHMW - buttons Jon Elson 2003-10-05 21:02:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Using a porter cable router to cut aluminum R Rogers 2003-10-05 21:59:57 UTC Re: [CAD_CAM_EDM_DRO] And UHMW is fine too! was Re: Using a porter cable router to cut aluminum Tyson S. 2003-10-05 21:59:58 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Jon Elson 2003-10-05 22:56:21 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum ballendo 2003-10-06 04:42:51 UTC And UHMW is fine too! ballendo 2003-10-06 04:46:53 UTC G1006 was Re: Using a porter cable router to cut aluminum doug98105 2003-10-06 07:03:01 UTC Re: And UHMW is fine too! sandeater 2003-10-06 07:43:54 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Russ Waters 2003-10-06 09:41:01 UTC Re: [CAD_CAM_EDM_DRO] G1006 was Re: Using a porter cable router to cut aluminum Tyson S. 2003-10-06 10:52:24 UTC Re: [CAD_CAM_EDM_DRO] Using a porter cable router to cut aluminum Tyson S. 2003-10-06 19:11:59 UTC Re: [CAD_CAM_EDM_DRO] G1006 was Re: Using a porter cable router to cut aluminum ballendo 2003-10-07 06:08:56 UTC G1006 was Re: Using a porter cable router to cut aluminum