RE: [CAD_CAM_EDM_DRO] DenverCNC?

The standard Taig configuration uses 200 oz-in motors on all 3 axes these
days. My mill originally came fitted with 140 oz-in motors, but they really
weren't powerful enough, particularly on the Z axis, and even more so since
they have changed to the box-section Z way construction which needs more
power to drive.

Regards,
Tony

At 19:16 27/10/2003 +1100, Peter Homann wrote:

>Hi,
>
>I don't believe that the 114 oz/in motors are adequate for the Taig mill.
>General consensus is that the Mill requires motors around the 200 Oz/in
>mark.
>
>A 114 oz/in motor will drive the mill but the max speed will be reduced. The
>standard Taig motors (180 oz/in I think) will give a max speed of around 60
>in/min. Not that you would want to drive it that fast. Most people seem to
>set the max speed to around 45 in/min.
>
>And no one cuts that fast :-)
>
>
>Cheers
>
>
>
>
>Peter Homann
>mailto:Peter.Homann@...
>Adacel Technologies Limited,
>250 Bay St, BRIGHTON, 3186, AUSTRALIA
>http://www.adacel.com <http://www.adacel.com>
>Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
>Mobile 0421-601 665
>
>
> > -----Original Message-----
> > From: Derek B. [mailto:hightechsystems@...]
> > Sent: Monday, 27 October 2003 5:47 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: RE: [CAD_CAM_EDM_DRO] DenverCNC?
> >
> >
> > Hi Mike,
> > Sorry it took a little while to get back to you as I was out of
> > town and no
> > email.
> > If you have any questions on this let me know.
> >
> > 1. You get the DenverCNC.Com controller package. This includes:
> > 4 axis motor driver box
> > Parallel port cable
> > Motor cable set with PacSci stepper motor connectors
> > 2. You also get 3 PacSci stepper motors 114oz/in
> > This is what I am using on mine
> > 3. Taig CNC ready mill 2019cr this is the biggest mill they
> > currently make.
> > Taig may take 4-6 weeks to ship from factory.
> > 4. Taig vise
> > 5. Taig collets set #1040
> > 6. Taig spindle wrench #1310
> > 7. 2 end or ball mills (depends on stock)
> > 8. Turbocnc for dos shareware and Demo Mach2 runs on XP or Win2000 limit
> > 1000 lines of g-code.
> >
> > You have everything get it up and running in 1 night plus start cutting.
> >
> > The DenverCNC.com controller box comes with a 2year warranty
> > against defects
> > from time of purchase.
> > The Taig also comes with a full 2year warranty.
> >
> > Best Regards,
> > Derek B.
> >
> > > -----Original Message-----
> > > From: Mike McCaughey
> > >
> > >
> > > I'm interested in taking the plunge into a taig cnc mill, and the
> > > system shown at www.denvercnc.com looks like a reasonable setup for
> > > me, but the website doesn't have much detail about the machine. I
> > > know that some of the Denver folks are on the list; can any of you
> > > who have experience with the DenverCNC system please drop me a line?
> > >
> > > Thanks!
> > > Mike
> > >
> > >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > to be a sister site to the CCED group, as many of the same
> > members are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Regards,
Tony