CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel

on 2004-09-21 11:02:00 UTC
A note about saving from a word processor without the txt extension...

Try File->Save As... and then select Plain Text from the 'Save as type'
drop down box. Now type the file name inside quotation marks,
"filename.cnc"

This works for MS Word.

-Archie



-----Original Message-----
From: turbulatordude [mailto:davemucha@...]
Sent: Tuesday, September 21, 2004 11:51 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Victor A. Estes"
<emc3zach@h...> wrote:
> Daniel,
>
> You mentioned a reference to doing G-code by hand and that
doing it in
> excel was a personal favorite. Could you shed some light on how
this is
> done. I'm currently working on a project where I have a lot of
data points
> (measurements) and my end game is to write g-code to mill the
points. The
> points are already in excel and it would be a big help to me if I
could do
> all of this in the program. Any advice would be appreciated.
>
> Thanks, Victor

I used excel to write points for a pcb when I had it in expressPCB (a
proprietary format that does not output a useable file)

What I did was to create columns for each axis

A B C D E

G00 x 1.123 y 0.234
G00 x 1.555 y 1.254


That makes it easire to see your numbers and you can chart them to
see if they are in some sequence you expect.

Line numbering also is easy.

To export the data, you can highlight the area of your work and then
copy it to the clipboard.

Then open a DOS window and from DOS, just type
copy con filename.cnc or
copy con filename.nc or whatever.

hit enter- the screen will show no prompt.

In the dos window, upper left, your mouse will show a drop down
window. click edit then paste. the text will be pasted.

then hold ctrl and hit Z to save the file.

Now you have a pure text file.

of course you can use any word processor, but mine keep adding .txt
after the name so I wind up with filename.cnc.txt and that is not
readable by turboCNC.

Dave








Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner


Yahoo! Groups Links

Discussion Thread

Ted Gregorius 2004-09-20 07:55:13 UTC Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 08:26:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Statman Designs, LLC 2004-09-20 08:51:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Jeff Jones 2004-09-20 09:17:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Ted Gregorius 2004-09-20 09:26:28 UTC Re: Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 09:35:11 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Jon Elson 2004-09-20 09:42:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 11:21:47 UTC Re: Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Statman Designs, LLC 2004-09-20 11:40:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 11:56:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 12:00:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Jeff Jones 2004-09-20 12:38:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Statman Designs, LLC 2004-09-20 12:52:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Fred Smith 2004-09-20 13:28:50 UTC Re: Recommended CAM software? Vector of course! Pete Brown (YahooGroups) 2004-09-20 14:02:12 UTC Re: Recommended CAM software? - BobCad vavaroutsos 2004-09-20 14:37:56 UTC Re: Recommended CAM software? - FreeMill Keith Rumley 2004-09-20 16:17:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad R Rogers 2004-09-20 17:35:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course! wanliker@a... 2004-09-20 20:07:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Pete Brown (YahooGroups) 2004-09-20 20:19:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course! Victor A. Estes 2004-09-20 22:40:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Bengt 2004-09-20 23:41:33 UTC Re: Recommended CAM software? - BobCad Fred Smith 2004-09-21 05:20:15 UTC Re: Recommended CAM software? - BobCad Hal Eckhart 2004-09-21 06:49:09 UTC [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad metlmunchr 2004-09-21 09:20:23 UTC Re: Recommended CAM software? - BobCad Victor A. Estes 2004-09-21 09:30:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad wanliker@a... 2004-09-21 09:42:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad turbulatordude 2004-09-21 09:51:10 UTC Re: Recommen .. writing G-Code in Excel Tom Hubin 2004-09-21 10:39:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel Stephen Wille Padnos 2004-09-21 10:44:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel Jones, Joseph A1 2004-09-21 11:02:00 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel Alan Marconett 2004-09-21 12:24:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommen .. writing G-Code in Excel R Rogers 2004-09-21 12:34:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Jeff Jones 2004-09-21 12:34:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course! metlmunchr 2004-09-21 12:41:07 UTC Re: Recommended CAM software? - BobCad Les Newell 2004-09-21 12:57:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course? turbulatordude 2004-09-21 13:14:24 UTC Re: Recommen .. Express-PCB Ted Gregorius 2004-09-21 13:15:35 UTC Re: Recommended CAM software? - BobCad metlmunchr 2004-09-21 14:12:32 UTC Re: Recommended CAM software? - BobCad Jeff Jones 2004-09-21 14:47:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course? Boss 2004-09-21 15:02:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course? Jeff Jones 2004-09-21 15:37:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course? wanliker@a... 2004-09-21 15:58:44 UTC Re: Recommended CAM software? Vector of course? Fred Smith 2004-09-21 16:07:34 UTC Re: Recommended CAM software? - Vector of course! R Rogers 2004-09-21 16:13:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Pete Brown (YahooGroups) 2004-09-21 17:09:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course! Jon Elson 2004-09-21 17:38:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? - BobCad Jeff Jones 2004-09-21 20:37:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course! Les Newell 2004-09-22 01:07:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Recommended CAM software? Vector of course? rotarysmp 2004-09-29 07:10:10 UTC Re: Recommen .. writing G-Code in Excel