Re: [CAD_CAM_EDM_DRO] Re: G2002, was Re: USB ports ?

A couple questions on the G2002:

a) servo or stepper ?

b) what is the maximum motor voltage ?

c) what is the maximum motor current ?

d) is there a way to read the machine position after an emergency
shutdown, ie are the encoders powered separately from the motors and is
there a communication link between the PC and the axes position
registers ?

On Fri, 2004-12-03 at 15:41 +0000, Mariss Freimanis wrote:
>
> Hi,
>
> The G204V "Vampire" drive design is finished. The first 100 beta
> units will be available at the beginning of January.
>
> That means I'm back on the G2002 (G2005?) project. The FPGA for the
> design is being coded right now. In summary, the G2002 will have:
>
> 1) 6 axis of step / direction (up to 4 MHz step rate)
> 2) 6 axies of encoder feedback (CH-A, CH-B, Index and Fault)
> 3) 8 analog output channels (+/-10V, 0-5V)
> 4) 8 analog input channels (0-5V)
> 5) 16 general purpose outputs (5-24VDC, 100mA)
> 6) 16 general purpose inputs (+/- 100V protected)
> 7) USB interface, USB powered
>
> Mariss
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> > R Rogers wrote:
> >
> > >Wasn't Art Fenerty working on a system like this for Mach2? He
> referred to it as a "cube" or something like that? Basically a remote
> pulse generator. However, I understood it was to work from the
> parallel port. Maybe he already released it and I'm unaware of it.
> > >
> > >
> > Yes, hardware by Mariss Freimanis of Gecko Drives, called the
> G2002, I
> > think. There is a group
> > of people working on it. It runs through the USB, I believe.
> >
> > Jon
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
--
Kim Lux (Mr.) Diesel Research Inc