G2002, was Re: USB ports ?

on 2004-12-03 08:50:56 UTC

a) It will control both.

b, c) Does not apply. This is not a drive, it is a controller. You
attach your drives to it.

Mariss

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Kim Lux <lux@d...> wrote:
>
> A couple questions on the G2002:
>
> a) servo or stepper ?
>
> b) what is the maximum motor voltage ?
>
> c) what is the maximum motor current ?
>
> d) is there a way to read the machine position after an emergency
> shutdown, ie are the encoders powered separately from the motors
and is
> there a communication link between the PC and the axes position
> registers ?
>
>
>
>
> On Fri, 2004-12-03 at 15:41 +0000, Mariss Freimanis wrote:
> >
> > Hi,
> >
> > The G204V "Vampire" drive design is finished. The first 100 beta
> > units will be available at the beginning of January.
> >
> > That means I'm back on the G2002 (G2005?) project. The FPGA for
the
> > design is being coded right now. In summary, the G2002 will have:
> >
> > 1) 6 axis of step / direction (up to 4 MHz step rate)
> > 2) 6 axies of encoder feedback (CH-A, CH-B, Index and Fault)
> > 3) 8 analog output channels (+/-10V, 0-5V)
> > 4) 8 analog input channels (0-5V)
> > 5) 16 general purpose outputs (5-24VDC, 100mA)
> > 6) 16 general purpose inputs (+/- 100V protected)
> > 7) USB interface, USB powered
> >
> > Mariss
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...>
wrote:
> > > R Rogers wrote:
> > >
> > > >Wasn't Art Fenerty working on a system like this for Mach2? He
> > referred to it as a "cube" or something like that? Basically a
remote
> > pulse generator. However, I understood it was to work from the
> > parallel port. Maybe he already released it and I'm unaware of
it.
> > > >
> > > >
> > > Yes, hardware by Mariss Freimanis of Gecko Drives, called the
> > G2002, I
> > > think. There is a group
> > > of people working on it. It runs through the USB, I believe.
> > >
> > > Jon
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
[Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> --
> Kim Lux (Mr.) Diesel Research Inc

Discussion Thread