Re: best type of hub for pulley - taper lock

Dave , Have a look at http://www.econobelt.com/e-Store/Pulleys.htm.
They have some taper locks that you may be interested in, also cogs
of all kinds, and belts HTH.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@y...> wrote:

>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Les Newell <lesnewell@h...>
> wrote:
> > I recently worked on a CNC router with keyed pulleys. As it was
> servo
> > drive the control compensated for backlash in the keyway until it
> got
> > really bad. When we took it out the key was round, rather than
> square
> > and the keyways were totally mashed. In the end we got the servo
> shaft
> > ground down and fitted a taperlock pulley.
> >
> > Les
>
>
> Taper Lock or Quick removeable. I didn't find any XL pulleys with

a

> taperlock type bore or any with the removeable bushing.
>
> McMaster has L with that type bore.
>
> In the end, I may go to that type.
>
> Dave