Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
Posted by
erie@s...
on 2005-01-13 21:41:09 UTC
Realize that I'm talking about runout, i.e. out of center, I've had stock XL
series pulleys that were off center .050, a couple of those and you dial in your
travel dead nuts at 1.000", only to find at 1.5" you're out to lunch. Seemingly
little things can become great sources of frustration and head scratching...
erie
Quoting turbulatordude <dave_mucha@...>:
series pulleys that were off center .050, a couple of those and you dial in your
travel dead nuts at 1.000", only to find at 1.5" you're out to lunch. Seemingly
little things can become great sources of frustration and head scratching...
erie
Quoting turbulatordude <dave_mucha@...>:
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, erie <erie@s...> wrote:
> > just a word of advise, buy all your pulleys with undersize bores
> and
> > have a "real" old time machinist
> > rebore them for you, browning and maurey (two of the larger
> suppliers)
> > both spec .004" runout,
> > waay too much for cnc applications, and a source of cyclical error
> that
> > bites most people in the ass at least
> > once.
> >
> > erie
>
> I'm planning on using 3/8 and 1/2" shafts and would not have a
> problem it I needed to ream the bores to fit.
>
> I will use drill rod for the shafting and that can be off as much as
> you mentioned.
>
> I wouldn't be uspset if I had to make my own Browning type bushing (
> I think tha is the name) with a taper on the ID to lock in the
> bushing and shaft.
>
> Dave
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Discussion Thread
turbulatordude
2005-01-13 11:54:42 UTC
best type of hub for pulleyts
lathehand_2
2005-01-13 13:29:51 UTC
Re: best type of hub for pulleyts
R Rogers
2005-01-13 15:40:03 UTC
Re: [CAD_CAM_EDM_DRO] best type of hub for pulleyts
turbulatordude
2005-01-13 17:03:45 UTC
Re: best type of hub for pulleyts
c_holm10017
2005-01-13 18:16:37 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
Jon Elson
2005-01-13 18:26:52 UTC
Re: [CAD_CAM_EDM_DRO] best type of hub for pulleyts
turbulatordude
2005-01-13 18:38:49 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
erie
2005-01-13 19:56:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
turbulatordude
2005-01-13 20:08:22 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
erie@s...
2005-01-13 21:41:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
Jon Elson
2005-01-13 22:02:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
Les Newell
2005-01-14 06:10:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
turbulatordude
2005-01-14 07:30:50 UTC
Re: best type of hub for pulley - taper lock
lathehand_2
2005-01-14 14:21:23 UTC
Re: best type of hub for pulley - taper lock
John Dammeyer
2005-01-14 14:39:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: best type of hub for pulley - taper lock
lathehand_2
2005-01-14 15:08:41 UTC
Re: best type of hub for pulley - taper lock
volitan712003
2005-01-14 15:52:12 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
grouchy_old_fred
2005-01-15 08:24:11 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
Jon Elson
2005-01-15 11:32:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
turbulatordude
2005-01-15 14:14:22 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
Torsten
2005-01-16 13:56:42 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
Rod McBeath
2005-01-16 22:25:54 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
turbulatordude
2005-01-22 06:05:36 UTC
Re: best type of hub for pulleyts (DONT USE A KEY)
Jon Elson
2005-01-22 11:13:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)
Alan Marconett
2005-01-22 11:32:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: best type of hub for pulleyts (DONT USE A KEY)