Re: Power supply for Servos - Energy dump and such - URL problems

It appears that Yahoo has now started using
temporary URLs or something. The URL provided
below does not work even if properly reassembled
after the line wrap. Could you tell us in plain
text where the file is?

Thanks,
Steve Stallings


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@y...> wrote:

>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "cnc_4_me" <cnc4me@g...>
> wrote:
> >
> > here is the url and the correction for a component.
> >
> >
> >
>

http://f6.grp.yahoofs.com/v1/YGUWQgywUky_ZHvbcMT_VezYgefaipzww5J7R_nII

> > Zzg9Ii_E73bxbkclsxk_ubuLEBeSgwQB5hU8KNmRe7q_Qe0AhD4pg/G320%20and%
> > 20G340/POWER%20SUPPLY.pdf
> >
> >
> > "The Power Supply circuit created by Mariss June 16, 2002, calls
> for
> > an 1N752 for
> > D5. The 1N752 provides 5.6 volts, not the 12 volts which the
> circuit
> > indicates. I
> > found the circuit did not work with a 5.6 volt zener, and did

work

> > with a 12 volt
> > zener, such as the 1N759A or the 1N5242B (I used the latter).
> >
> > There was lengthy discussion of this as I debugged my PCB and for
> > anyone who needs
> > to know they can find it on the list. (Heads much wiser than mine
> > advised the
> > change was appropriate.)
> >
> > Grant Fair"
> >
> >
> > Wally
>
> Thanks, I remember reading that post, but could not find it in a
> search. seems I only went back to Oct, the date on the pdf's.
>
>
>
> Dave