CAD CAM EDM DRO - Yahoo Group Archive

Re: Power supply for Servos - Energy dump and such

on 2005-02-19 23:05:57 UTC
>
>
> A 60W 120V bulb draws I = P/E So 60W/120V = .5 amp, not 6 amps.
>
> Yes a cold bulb draws more power when it heats up, but in this
> application i do not think it would be enough power or long
enough...
>
> If you have your heart set on ligh bulbs you could paralell a bunch
> of them.
>
>
> Wally


I'm looking for a cheap way to get a 20 watt resistor !

Wirewound are huge, longer than my board.

Aluminum cased will probably be best as I can mount it remote, to the
side of the enclosure.

Thick film are about the same cost as the aluminum heat sink type,
but are small enough to put on the board.

Decisions...

Dave

Discussion Thread

turbulatordude 2005-02-17 13:28:11 UTC Power supply for Servos cnc_4_me 2005-02-17 15:07:05 UTC Re: Power supply for Servos Lance Hopper 2005-02-17 15:44:55 UTC Re: Power supply for Servos turbulatordude 2005-02-17 16:39:00 UTC Re: Power supply for Servos R Rogers 2005-02-17 17:37:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos braidmeister 2005-02-17 18:04:35 UTC Re: Power supply for Servos cnc_4_me 2005-02-17 18:22:47 UTC Re: Power supply for Servos turbulatordude 2005-02-17 18:37:23 UTC Re: Power supply for Servos - bridge and caps cnc_4_me 2005-02-17 18:41:17 UTC Re: Power supply for Servos braidmeister 2005-02-17 18:48:22 UTC Re: Power supply for Servos - bridge and caps turbulatordude 2005-02-17 19:09:13 UTC Re: Power supply for Servos cnc_4_me 2005-02-17 19:26:48 UTC Re: Power supply for Servos turbulatordude 2005-02-17 19:48:10 UTC Re: Power supply for Servos - Energy dump and such Stephen Wille Padnos 2005-02-17 20:02:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-17 20:05:10 UTC Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-17 20:24:55 UTC Re: Power supply for Servos - Energy dump and such Polaraligned 2005-02-18 04:34:40 UTC Re: Power supply for Servos - bridge and caps R Rogers 2005-02-18 04:53:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - bridge and caps R Rogers 2005-02-18 05:03:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such braidmeister 2005-02-18 08:04:16 UTC Re: Power supply for Servos - bridge and caps Roy J. Tellason 2005-02-18 08:17:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - bridge and caps sciciora 2005-02-18 08:46:12 UTC Bridge voltage rating: Re: Power supply for Servos - bridge and caps turbulatordude 2005-02-18 09:19:32 UTC Bridge voltage rating: Re: Power supply for Servos - bridge and caps cnc_4_me 2005-02-18 11:33:26 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-18 11:44:27 UTC Re: Power supply for Servos - bridge and caps cnc_4_me 2005-02-18 11:50:51 UTC Bridge voltage rating: Re: Power supply for Servos - bridge and caps cnc_4_me 2005-02-18 11:55:24 UTC Bridge voltage rating: Re: Power supply for Servos - bridge and caps turbulatordude 2005-02-18 14:23:58 UTC Bridge voltage rating: Re: Power supply for Servos - bridge and caps Polaraligned 2005-02-18 14:25:43 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-18 14:59:39 UTC Re: Power supply for Servos - Energy dump and such JanRwl@A... 2005-02-18 17:35:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - bridge and caps turbulatordude 2005-02-18 18:51:44 UTC Re: Power supply for Servos - Energy dump and such Dan Mauch 2005-02-19 07:29:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-19 07:52:11 UTC Re: Power supply for Servos - Energy dump and such Steve Stallings 2005-02-19 10:06:50 UTC Re: Power supply for Servos - Energy dump and such - URL problems turbulatordude 2005-02-19 11:57:56 UTC Re: Power supply for Servos - Energy dump and such - URL problems cnc_4_me 2005-02-19 13:32:01 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-19 13:55:03 UTC Re: Power supply for Servos - Energy dump and such - URL problems turbulatordude 2005-02-19 15:38:19 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-19 16:09:41 UTC Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-19 20:13:20 UTC Re: Power supply for Servos - Energy dump and such wanliker@a... 2005-02-19 20:29:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-19 20:54:48 UTC Re: Power supply for Servos - Energy dump and such wanliker@a... 2005-02-19 21:19:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-19 21:25:43 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-19 22:10:29 UTC Re: Power supply for Servos - Energy dump and such JanRwl@A... 2005-02-19 22:56:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-19 23:05:57 UTC Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-19 23:25:22 UTC Re: Power supply for Servos - Energy dump and such David Speck 2005-02-19 23:34:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-20 00:01:36 UTC Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-20 00:03:53 UTC Re: Power supply for Servos - Energy dump and such JCullins 2005-02-20 04:51:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such Lance Hopper 2005-02-20 09:33:32 UTC Re: Power supply for Servos - Energy dump and such turbulatordude 2005-02-20 09:47:29 UTC Re: Power supply for Servos - Light Bulbs turbulatordude 2005-02-20 10:17:44 UTC Re: Power supply for Servos - dump speed Stephen Wille Padnos 2005-02-20 12:44:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Energy dump and such cnc_4_me 2005-02-20 16:13:53 UTC Re: Power supply for Servos - dump speed turbulatordude 2005-02-20 20:18:55 UTC Re: Power supply for Servos - dump speed turbulatordude 2005-02-20 20:37:39 UTC Re: Power supply for Servos - Sizign the resistor Jon Elson 2005-02-20 21:09:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Power supply for Servos - Sizign the resistor