Re: Power supply for Servos - Energy dump and such

>
> here is the url and the correction for a component.
>
>
>

> Zzg9Ii_E73bxbkclsxk_ubuLEBeSgwQB5hU8KNmRe7q_Qe0AhD4pg/G320%20and%
> 20G340/POWER%20SUPPLY.pdf
>
>
> "The Power Supply circuit created by Mariss June 16, 2002, calls

> an 1N752 for
> D5. The 1N752 provides 5.6 volts, not the 12 volts which the

> indicates. I
> found the circuit did not work with a 5.6 volt zener, and did work
> with a 12 volt
> zener, such as the 1N759A or the 1N5242B (I used the latter).
>
> There was lengthy discussion of this as I debugged my PCB and for
> anyone who needs
> to know they can find it on the list. (Heads much wiser than mine
> advised the
> change was appropriate.)
>
> Grant Fair"
>
>
> Wally