Re: Power supply for Servos - Energy dump and such - URL problems

>
> It appears that Yahoo has now started using
> temporary URLs or something. The URL provided
> below does not work even if properly reassembled
> after the line wrap. Could you tell us in plain
> text where the file is?
>
> Thanks,
> Steve Stallings
>

>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
> <dave_mucha@y...> wrote:
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "cnc_4_me" <cnc4me@g...>
> > wrote:
> > >
> > > here is the url and the correction for a component.
> > >
> > >
> > >
> >
>

> > > Zzg9Ii_E73bxbkclsxk_ubuLEBeSgwQB5hU8KNmRe7q_Qe0AhD4pg/G320%

> > > 20G340/POWER%20SUPPLY.pdf
> > >
> > >
> > > "The Power Supply circuit created by Mariss June 16, 2002,

> > for
> > > an 1N752 for
> > > D5. The 1N752 provides 5.6 volts, not the 12 volts which the
> > circuit
> > > indicates. I
> > > found the circuit did not work with a 5.6 volt zener, and did
> work
> > > with a 12 volt
> > > zener, such as the 1N759A or the 1N5242B (I used the latter).
> > >
> > > There was lengthy discussion of this as I debugged my PCB and

> > > anyone who needs
> > > to know they can find it on the list. (Heads much wiser than

> > > advised the
> > > change was appropriate.)
> > >
> > > Grant Fair"
> > >
> > >
> > > Wally
> >
> > Thanks, I remember reading that post, but could not find it in a
> > search. seems I only went back to Oct, the date on the pdf's.
> >
> >
> >
> > Dave