CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power

on 2005-05-11 13:09:16 UTC
I have bought 3 phase motors for about $1 a horsepower. There
doesn't seem to be much of a market for used 3 phase motors.
The Industrial Customer is not interested in spending money on
someone's scrap. The howmeworkshop user doesn't have
3 phase. So it is in the scrap dealers benefit to sell the the small
shop owner a motor to make a 3 phase converter. If he gets the
converter operating, he may be back for more. So, the scrap dealer
has to get a saleable lot of motors or they are just scrap iron. If
he gets several tons, then they can go to a foundry that can use the
copper in their melt.
The scrap dealer needs to be your friend. You need him, He didn't
buy the material with the intention of selling it a piece at time to you.
He bought it with another customer in mind that buys it by the ton.
Most of the time, you are a 'pain'. Many times, the extra effort to
sell to you isn't worth it. Now Salvage Yards are a different business.
If you are lucky, you have a Salvage/Scrap yard.

Bob McKnight




On 11 May 2005 at 11:57, Alan Marconett wrote:

Hi cs,

Yeah, I figured I'd get a laugh. But consider that you can pretty well
judge the power handling of a transformer by the weight.

If you are lucky, a surplus dealer will sell you a transformer or motor by
the pound (meaning CHEAP, if he thinks it's just scrap). If he looks up
the
model in a catalogue... OK, that's a different topic. ;>)

Alan KM6VV


> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Codesuidae
> Sent: Wednesday, May 11, 2005 10:53 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating
> power
>
> Mariss Freimanis wrote:
>
> >Pound for pound, generally figure on twice the continuous power over
> >a step motor.
> >
> >
> I dunno 'bout the rest'a y'all, but I haven't found anyone selling
> (working) motors by the pound. Wouldn't power per dollar be more
> practical?
>
> cs
>




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Pete Brown (YahooGroups) 2005-05-06 06:22:54 UTC What makes a motor a servo? turbulatordude 2005-05-06 07:23:06 UTC Re: What makes a motor a servo? Jon Elson 2005-05-06 08:19:45 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? Pete Brown (YahooGroups) 2005-05-06 09:29:24 UTC RE: [CAD_CAM_EDM_DRO] What makes a motor a servo? Alex Holden 2005-05-06 10:32:26 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? Les Newell 2005-05-06 11:27:14 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Pete Brown (YahooGroups) 2005-05-06 12:30:42 UTC RE: [CAD_CAM_EDM_DRO] What makes a motor a servo? cnc_4_me 2005-05-06 12:33:28 UTC Re: What makes a motor a servo? Alex Holden 2005-05-06 12:48:41 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? cnc002@a... 2005-05-06 13:25:14 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? Codesuidae 2005-05-06 13:38:31 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? Jon Elson 2005-05-06 18:56:30 UTC Re: [CAD_CAM_EDM_DRO] What makes a motor a servo? turbulatordude 2005-05-06 21:25:53 UTC Re: What makes a motor a servo? treadmill cnc_4_me 2005-05-06 21:39:03 UTC Re: What makes a motor a servo? cnc_4_me 2005-05-06 21:54:02 UTC Re: What makes a motor a servo? treadmill turbulatordude 2005-05-06 22:28:08 UTC Re: What makes a motor a servo? 80% of rated speed ? cnc_4_me 2005-05-06 22:34:45 UTC Re: What makes a motor a servo? 80% of rated speed ? vrsculptor 2005-05-07 09:34:49 UTC Re: What makes a motor a servo? treadmill 1.5 volt turbulatordude 2005-05-07 10:02:18 UTC Re: What makes a motor a servo? treadmill 1.5 volt Mariss Freimanis 2005-05-07 12:00:35 UTC Re: What makes a motor a servo? Jon Elson 2005-05-07 12:56:21 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? treadmill Jon Elson 2005-05-07 13:08:50 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? 80% of rated speed ? Jon Elson 2005-05-07 13:28:52 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Jon Elson 2005-05-07 13:40:11 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Mariss Freimanis 2005-05-07 14:46:53 UTC Re: What makes a motor a servo? Polaraligned 2005-05-07 15:07:09 UTC Re: What makes a motor a servo? Mariss Freimanis 2005-05-07 15:44:04 UTC Re: What makes a motor a servo? Ron Kline 2005-05-07 16:45:05 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? R Rogers 2005-05-07 18:00:17 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? cnc_4_me 2005-05-07 18:04:15 UTC Re: What makes a motor a servo? cnc_4_me 2005-05-07 18:16:56 UTC Re: What makes a motor a servo? Polaraligned 2005-05-07 18:37:20 UTC Re: What makes a motor a servo? Polaraligned 2005-05-07 18:44:10 UTC Re: What makes a motor a servo? JanRwl@A... 2005-05-07 19:38:02 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? cnc_4_me 2005-05-07 19:47:49 UTC Re: What makes a motor a servo? Mariss Freimanis 2005-05-07 20:12:18 UTC Re: What makes a motor a servo? JanRwl@A... 2005-05-07 20:23:13 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Jon Elson 2005-05-07 21:29:37 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Jon Elson 2005-05-07 21:36:40 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? Mariss Freimanis 2005-05-07 22:06:51 UTC Re: What makes a motor a servo? David Bloomfield 2005-05-08 05:46:29 UTC Re: What makes a motor a servo? turbulatordude 2005-05-08 05:57:41 UTC Re: What makes a motor a servo? Ed Fanta 2005-05-08 06:29:20 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? lcdpublishing 2005-05-08 09:27:46 UTC Re: What makes a motor a servo? Polaraligned 2005-05-08 10:08:45 UTC Re: What makes a motor a servo? Polaraligned 2005-05-08 10:17:29 UTC Re: What makes a motor a servo? Jon Elson 2005-05-08 11:17:44 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? cnc_4_me 2005-05-08 11:35:12 UTC Re: What makes a motor a servo? lcdpublishing 2005-05-08 11:54:09 UTC Re: What makes a motor a servo? cnc_4_me 2005-05-08 12:12:49 UTC Re: What makes a motor a servo? Polaraligned 2005-05-08 12:20:54 UTC Re: What makes a motor a servo? Polaraligned 2005-05-08 12:34:55 UTC Re: What makes a motor a servo? Polaraligned 2005-05-08 12:41:01 UTC Re: What makes a motor a servo? Mariss Freimanis 2005-05-08 12:42:04 UTC Re: What makes a motor a servo? turbulatordude 2005-05-08 15:35:11 UTC Re: What makes a motor a servo? - real world applications bobmcknight@c... 2005-05-09 23:37:05 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? turbulatordude 2005-05-10 07:18:49 UTC Re: What makes a motor a servo? calculating power turbulatordude 2005-05-10 07:29:46 UTC Re: What makes a motor a servo? Polaraligned 2005-05-10 11:40:29 UTC Re: What makes a motor a servo? Polaraligned 2005-05-10 13:23:51 UTC Re: What makes a motor a servo? John Meissner 2005-05-10 14:21:37 UTC Re: What makes a motor a servo? John Meissner 2005-05-10 15:20:32 UTC Re: What makes a motor a servo? Polaraligned 2005-05-10 17:55:10 UTC Re: What makes a motor a servo? calculating power Erie Patsellis 2005-05-10 19:17:15 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power R Rogers 2005-05-10 20:23:24 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power turbulatordude 2005-05-10 20:25:11 UTC Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-10 21:11:37 UTC Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-10 21:22:03 UTC Re: What makes a motor a servo? calculating power Erie Patsellis 2005-05-10 21:27:29 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power turbulatordude 2005-05-10 23:44:45 UTC Re: What makes a motor a servo? calculating power Alex Holden 2005-05-11 01:00:09 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Les Newell 2005-05-11 02:40:25 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power lcdpublishing 2005-05-11 04:44:17 UTC Re: What makes a motor a servo? calculating power Les Newell 2005-05-11 05:52:52 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power turbulatordude 2005-05-11 07:02:58 UTC Re: What makes a motor a servo? gearing servos Alex Holden 2005-05-11 07:20:53 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? gearing servos turbulatordude 2005-05-11 08:09:09 UTC Re: What makes a motor a servo? gearing servos Alan Marconett 2005-05-11 08:27:18 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power lcdpublishing 2005-05-11 08:53:35 UTC Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-11 10:01:27 UTC Re: What makes a motor a servo? calculating power bobmcknight@c... 2005-05-11 10:45:16 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Codesuidae 2005-05-11 10:53:27 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-11 11:06:53 UTC Re: What makes a motor a servo? calculating power Alan Marconett 2005-05-11 11:49:12 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Alan Marconett 2005-05-11 11:57:39 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-11 11:59:45 UTC Re: What makes a motor a servo? calculating power Mariss Freimanis 2005-05-11 12:10:00 UTC Re: What makes a motor a servo? calculating power Codesuidae 2005-05-11 12:29:35 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Hugh Prescott 2005-05-11 12:59:24 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power bobmcknight@c... 2005-05-11 13:08:51 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power bobmcknight@c... 2005-05-11 13:09:16 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Luke1027 2005-05-11 14:00:18 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power turbulatordude 2005-05-11 15:05:43 UTC Re: What makes a motor a servo? calculating power Alan Marconett 2005-05-11 16:15:59 UTC RE: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power Jon Elson 2005-05-11 19:26:23 UTC Re: [CAD_CAM_EDM_DRO] Re: What makes a motor a servo? calculating power David Bloomfield 2005-05-11 20:21:19 UTC Re: What makes a motor a servo? calculating power Polaraligned 2005-05-12 03:05:43 UTC Servo drives- Mariss turbulatordude 2005-05-12 07:54:41 UTC Re: Servo drives- Mariss Adrian Kole 2005-05-12 08:13:30 UTC Re: Servo drives- Mariss Codesuidae 2005-05-12 08:16:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Mariss Freimanis 2005-05-12 08:30:36 UTC Re: Servo drives- Mariss R Rogers 2005-05-12 08:32:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Alan Marconett 2005-05-12 08:37:39 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss JCullins 2005-05-12 08:50:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Jon Elson 2005-05-12 09:28:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Leslie Watts 2005-05-12 09:52:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Mariss Freimanis 2005-05-12 10:00:50 UTC Re: Servo drives- Mariss Mariss Freimanis 2005-05-12 10:22:31 UTC Re: Servo drives- Mariss Codesuidae 2005-05-12 10:33:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Les Newell 2005-05-12 11:16:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss turbulatordude 2005-05-12 12:01:55 UTC Re: Servo drives- Mariss Mariss Freimanis 2005-05-12 12:14:08 UTC Re: Servo drives- Mariss Leslie Watts 2005-05-12 13:08:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss cnc_4_me 2005-05-12 13:10:08 UTC Re: Servo drives- Mariss David A. Frantz 2005-05-12 15:04:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss JCullins 2005-05-12 15:08:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss Mariss Freimanis 2005-05-12 16:18:53 UTC Re: Servo drives- Mariss JCullins 2005-05-12 16:41:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- Mariss turbulatordude 2005-05-12 19:35:25 UTC Re: Servo drives- exploding head Erie Patsellis 2005-05-12 20:11:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- exploding head cnc_4_me 2005-05-12 20:28:03 UTC Re: Servo drives- exploding head Polaraligned 2005-05-13 03:10:01 UTC Re: Servo drives- Mariss Polaraligned 2005-05-13 03:14:48 UTC Re: Servo drives- Mariss turbulatordude 2005-05-13 08:00:30 UTC Re: Servo drives- Mariss Leslie Watts 2005-05-13 08:15:28 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo drives- exploding head cnc_4_me 2005-05-13 08:27:58 UTC Re: Servo drives- exploding head m0nkey0ne 2005-05-13 08:53:54 UTC Re: Servo drives- exploding head prevention Dave Shiels 2005-05-13 14:55:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- exploding head turbulatordude 2005-05-14 08:26:04 UTC Re: Servo drives- exploding head caudlet 2005-05-14 09:01:51 UTC Re: Servo drives- exploding head Leslie Watts 2005-05-14 10:21:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo drives- exploding head turbulatordude 2005-05-14 10:53:16 UTC Re: Servo drives- exploding head turbulatordude 2005-05-14 12:42:47 UTC Re: Servo drives- exploding head - Router/plasma Erie Patsellis 2005-05-14 15:45:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo drives- exploding head - Router/plasma turbulatordude 2005-05-14 18:37:57 UTC Re: Servo drives- exploding head - Router/plasma Dave Fisher 2005-05-23 16:05:06 UTC RE: [CAD_CAM_EDM_DRO] Re:NEMA 23 Stepper Motors