CAD CAM EDM DRO - Yahoo Group Archive

Re: BOSS5 Where to plug the Geckos???

Posted by braidmeister
on 2005-06-25 13:14:50 UTC
Thanks Dave. The bulb idea makes sense...I really don't like the idea
of shorting them out with a screwdriver...since I may use them in the
future.

-Brady

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@y...> wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "braidmeister"
> <braidmeister@y...> wrote:
> > Well I took the plunge yesterday and gutted the computer cabinet
for
> > the most part. I only had to cut 2 wires, which were soldered to
the
> > transformer buried in the bottom. On a side noe...can anyone tell
me
> > the right way to discharge those big capacitors??? I was sweating
> > while disconnecting them fearing getting zapped. :)
>
>
> First, wear safety glasses. if the thing sparks, the sparks will
fly.
>
> First, test with a multi-meter. Most likely there is nothing in
there
> if they have not been connected for a few days. Caps are not very
> good for long term storage.
>
> Then, use a regular household light bulb.
>
> It will burn out if the voltage is over 125 volts or so, but since
it
> is basically a resistor, it will drain anything in the caps.
>
> The light is a self regulating device so as long at the voltage is
not
> too great, the light will just turn on, then dim until it goes out.
> At that point, you can leave the bulb on it for a few minutes to
make
> sure is goes dead. then use an old screwdriver, then jumper it
with a
> wire as you remove it.
>
> If you want to save the cap, charge it with a couple volts. caps
> should not be drained to a totally dead state if you want to have a
> long live. And, they are probably worth $$ to someone in need.
>
> Dave

Discussion Thread

braidmeister 2005-06-23 16:55:31 UTC BOSS5 Where to plug the Geckos??? Keith Clark 2005-06-23 20:25:45 UTC Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-23 20:46:20 UTC Re: BOSS5 Where to plug the Geckos??? Keith Clark 2005-06-24 04:15:47 UTC Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 05:45:56 UTC Re: BOSS5 Where to plug the Geckos??? Alex Holden 2005-06-25 06:35:53 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? Les Newell 2005-06-25 08:14:08 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 10:38:08 UTC Re: BOSS5 Where to plug the Geckos??? Les Newell 2005-06-25 12:14:02 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? turbulatordude 2005-06-25 12:33:55 UTC Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 13:14:50 UTC Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 13:21:03 UTC Re: BOSS5 Where to plug the Geckos??? Les Newell 2005-06-25 14:02:12 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 14:15:43 UTC Re: BOSS5 Where to plug the Geckos??? Les Newell 2005-06-25 17:57:29 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? Keith Clark 2005-06-25 20:47:09 UTC Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-25 21:22:22 UTC Re: BOSS5 Where to plug the Geckos??? Polaraligned 2005-06-26 05:03:24 UTC Re: BOSS5 Where to plug the Geckos??? Polaraligned 2005-06-26 05:07:11 UTC Re: BOSS5 Where to plug the Geckos??? Polaraligned 2005-06-26 05:16:41 UTC Re: BOSS5 Where to plug the Geckos??? Alex Holden 2005-06-26 06:25:55 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? braidmeister 2005-06-26 06:57:56 UTC Re: BOSS5 Where to plug the Geckos??? caedave 2005-06-26 14:16:21 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos??? Jon Elson 2005-06-27 22:03:49 UTC Re: [CAD_CAM_EDM_DRO] Re: BOSS5 Where to plug the Geckos???