Re: BOSS5 Where to plug the Geckos???

Cool ~ Thanks Les! I just yanked out the 3-legged beast and instead
of using cap screws behind the transformer (like the rest of the
transformer bracket) they used hex bolts that were a real bugger to
get at. Wasn't as heavy as I thought it would be. It and the 3 chokes
are on the floor.

Question: What are the relays at the bottom of the CPU cabinet for?
At 1st glace it looks like they have something to do with the limit
switches. Did you happen to reuse these? I am wondering if Mach2
needs a normally closed/open (whatever is opposite of what I already
have) to run correctly.

Thanks!!!
-Brady

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Les Newell <lesnewell@h...>
wrote:

> Hi Brady,
>
> That looks like the 110V transformer. Mine was mounted on the top

left

> of the cabinet. Hopefully there should be a label somewhere saying

what

> the terminals are. I have uploaded a pic of my transformer here
> <http://www.lesnewell.co.uk/Bridgeport/transformer.jpg>. It is not
> exactly the same so I would be careful trying to use the same

wiring.

>
> Les
>
> braidmeister wrote:
>
> >Les,
> >The transformer at the bottom has: H1 - H3 - H2 - H4 terminals at

the

> >top and X2 - X1 terminals at the bottom of it...not sure it's
> >function (or if this is the 110v trans you were talking about)
> >
> >
> >