RE: [CAD_CAM_EDM_DRO] Variable Transformer

I assumed that everyone "Think" that you are Electrical wise.

Make my day "Punk"....

Andy Wander <awander@...> wrote:
Well, I guess you could say, "If you don't know why it could be dangerous,
don't try it!"

There is probably some validity to that.

And I didn't think anyone was rude, merely impatient-sounding. as if to say,
"Is that guy asking the same old question again?"

Andy Wander
Verrex Corporation

-----Original Message-----
From: Michael Larson [mailto:mykow@...]
Sent: Tuesday, June 28, 2005 8:42 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Variable Transformer

I'm sorry, I didn't mean to be rude, I was simply relating the sum of
what I knew. I'm after the same detailed explanation you are, and I
want to reiterate that "don't try it" with nothing added is a waste of
everyone's time.
Michael

Andy Wander wrote:

>Tony:
>
>I guess I should have learned my lesson last time I was in an exchange on
>this subject, but I sometimes have trouble holding my tongue.
>
>With no disrespect meant to you, Mariss, Jan Rowland, or any of the others
>who have "answered" the question, I still feel that it has NOT been

answered

>at all.
>Your reply, below, is clever, and made me chuckle, but it doesn't give any
>real info on why the use of a non-isolated power supply is dangerous.
>
>Mariss' answer, which I quote here,
>"Do not even think about it! We have gotten drives back where even the
>1/8" aluminum mounting plate had corners melted from using a variable
>autotransformer. 115VAC at your circuit breaker current rating (>50A)
>can flow thru the drive to ground. That and you can get killed just by
>touching it."
>also just basically says "Don't do it". He says that they have gotten

drives

>back that were damaged , but there is no info on whether they were hooked

up

>wrong, or if (as I suspect) the use of a DC supply which is "balanced" with
>respect to ground is the real culprit(ok, I realize that a "balanced" DC
>supply WILL probably be the result of using a variac as the AC voltage
>source, but if that's true, why not say so in the answer?). a 50A circuit
>breaker feeding a 750-1500VA isolation transformer will be plenty dangerous
>also, just from the standpoint of the current it can supply. The part about
>"you can get killed just by touching it", could equally apply to an

isolated

>high-voltage DC supply, or even isolated 120VAC.
>
>Other answers I have seen simply state that "isolation is necessary",
>without explaining why, and when I ask, I am ignored, or just told to
>believe it.
>
>I have also been told that "it's not the voltage, it's the current that
>kills you", which ignores the fact that current won't occur without the
>voltage to drive it.
>
>I am sure Mariss knows a lot more than me about it, and many others here
>might also(and probably do). But then why can't anyone actually explain it?
>
>
>Now, for my own answer as to why it is not advisable to use a variac with

no

>isolation, it seems that the dangers are related to "common practice", and
>to what happens when something is wired incorrectly, or gets damaged or
>loose. Those are certainly valid reasons for doing it with an isolation
>transformer, but I don't see them presented as answers here-all I see are
>dire warnings of "danger", but no explanation(that I can see, anyway) of
>why.
>
>Waiting(hoping) for enlightenment,
>
>Andy Wander
>Verrex Corporation
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links








---------------------------------
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football

[Non-text portions of this message have been removed]