Re: Sinosidal Encoder signals to TTL signals converter
Posted by
beerexalan
on 2005-12-30 13:02:41 UTC
Has anyone looked at Analog Devices AD2S1200 for this? It takes sin
cos data and emulates encoder.
A little over kill on the most part but might work. I am facing the
same problem on a machine I am working on.
Rex
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Reilley"
<micrio@m...> wrote:
cos data and emulates encoder.
A little over kill on the most part but might work. I am facing the
same problem on a machine I am working on.
Rex
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Reilley"
<micrio@m...> wrote:
>signals
> It looks like it costs 95.00 UK Pounds. There is a
> price sheet elsewhere on the web site.
>
> Pete.
>
>
>
> ----- Original Message -----
> From: "bazer_20002000" <Fredwick@b...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, December 30, 2005 12:56 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL
> convertercheaper
>
>
> You could also try the following
> http://www.deva.co.uk/datasheets/deva018.pdf
> Again no price but at least it looks cheap!
> Fred
>
> PS 11uA interaface typically had A, B and Z (rotation counter)
>
> PPS The deva interface is £69 plus vat and is sold by RS (RSwww.com
> in europe although they are out of stock) Even then perhaps
> to by a TTL version on ebay!wanliker@a...,
>
> Snip> > > Hi All,
> > > >
> > > > Does anybody know how to convert the Sine wave
> > > signals
> > > > of Heidenhain ROD 450 encoder to the standard TTL
> > > > signals. Is there any IC or circuit commercially
> > > > available for this?
> > > >
> > > > Regards
> > > >
> > > > Babar
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > __________________________________________
> > > > Yahoo! DSL - Something to write home about.
> > > > Just $16.99/mo. or less.
> > > > dsl.yahoo.com
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES:
> > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe:
> > > CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe:
> > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > wanliker@a..., timg@k...
> > > Moderator: pentam@c... indigo_red@q...
> > > davemucha@j... [Moderators]
> > > URL to this group:
> > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru
> > > Google.com to reach it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I
> > > consider this to be a sister site to the CCED group,
> > > as many of the same members are there, for OT
> > > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> > > DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> > > ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > __________________________________
> > Yahoo! for Good - Make a difference this year.
> > http://brand.yahoo.com/cybergivingweek2005/
> >
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> timg@k...reach it if
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> you have trouble.be a
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
> sister site to the CCED group, as many of the same members arethere, for OT
> subjects, that are not allowed on the CCED list.THEM.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
Discussion Thread
JanRwl@A...
2005-12-27 19:09:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers to control...
Babar
2005-12-27 22:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-27 23:45:29 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Mika Salmi
2005-12-28 02:33:22 UTC
VS: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-28 20:20:27 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-29 02:34:15 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 07:52:30 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-29 09:57:18 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-29 13:56:17 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-29 20:12:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 21:10:41 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-29 21:18:03 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Stephen Wille Padnos
2005-12-29 21:24:26 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Andy Wander
2005-12-29 21:41:50 UTC
RE: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
wanliker@a...
2005-12-29 21:45:48 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 21:57:02 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-30 05:35:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Peter Reilley
2005-12-30 07:18:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Alan Marconett
2005-12-30 09:43:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 09:52:46 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 09:54:04 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
beerexalan
2005-12-30 13:02:41 UTC
Re: Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-30 13:22:16 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Alan Marconett
2005-12-30 13:41:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 18:57:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Thomas
2005-12-30 20:09:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
chris morley
2006-01-01 11:27:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter