Re: Sinosidal Encoder signals to TTL signals converter
Posted by
bazer_20002000
on 2005-12-30 13:22:16 UTC
I dont think it will from the data sheet its a resolver to digital
(ie serial) converter. The outputs and inputs to a resolver are
different to an encoder as it works in a totally different way.
Fred
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "beerexalan"
<beerexalan@y...> wrote:
(ie serial) converter. The outputs and inputs to a resolver are
different to an encoder as it works in a totally different way.
Fred
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "beerexalan"
<beerexalan@y...> wrote:
>sin
> Has anyone looked at Analog Devices AD2S1200 for this? It takes
> cos data and emulates encoder.the
>
> A little over kill on the most part but might work. I am facing
> same problem on a machine I am working on.(RSwww.com
>
> Rex
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Reilley"
> <micrio@m...> wrote:
> >
> > It looks like it costs 95.00 UK Pounds. There is a
> > price sheet elsewhere on the web site.
> >
> > Pete.
> >
> >
> >
> > ----- Original Message -----
> > From: "bazer_20002000" <Fredwick@b...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Friday, December 30, 2005 12:56 AM
> > Subject: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL
> signals
> > converter
> >
> >
> > You could also try the following
> > http://www.deva.co.uk/datasheets/deva018.pdf
> > Again no price but at least it looks cheap!
> > Fred
> >
> > PS 11uA interaface typically had A, B and Z (rotation counter)
> >
> > PPS The deva interface is £69 plus vat and is sold by RS
> > in europe although they are out of stock) Even then perhapsto
> cheaper
> > to by a TTL version on ebay!
> >
> > Snip> > > Hi All,
> > > > >
> > > > > Does anybody know how to convert the Sine wave
> > > > signals
> > > > > of Heidenhain ROD 450 encoder to the standard TTL
> > > > > signals. Is there any IC or circuit commercially
> > > > > available for this?
> > > > >
> > > > > Regards
> > > > >
> > > > > Babar
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > __________________________________________
> > > > > Yahoo! DSL - Something to write home about.
> > > > > Just $16.99/mo. or less.
> > > > > dsl.yahoo.com
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES:
> > > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe:
> > > > CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe:
> > > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > > wanliker@a..., timg@k...
> > > > Moderator: pentam@c... indigo_red@q...
> > > > davemucha@j... [Moderators]
> > > > URL to this group:
> > > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru
> > > > Google.com to reach it if you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I
> > > > consider this to be a sister site to the CCED group,
> > > > as many of the same members are there, for OT
> > > > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> > > > DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> > > > ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Yahoo! for Good - Make a difference this year.
> > > http://brand.yahoo.com/cybergivingweek2005/
> > >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> be aPOSTING
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
>
Discussion Thread
JanRwl@A...
2005-12-27 19:09:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers to control...
Babar
2005-12-27 22:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-27 23:45:29 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Mika Salmi
2005-12-28 02:33:22 UTC
VS: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-28 20:20:27 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-29 02:34:15 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 07:52:30 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-29 09:57:18 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
juan gelt
2005-12-29 13:56:17 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-29 20:12:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 21:10:41 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-29 21:18:03 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Stephen Wille Padnos
2005-12-29 21:24:26 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Andy Wander
2005-12-29 21:41:50 UTC
RE: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
wanliker@a...
2005-12-29 21:45:48 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-29 21:57:02 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Babar
2005-12-30 05:35:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Peter Reilley
2005-12-30 07:18:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Alan Marconett
2005-12-30 09:43:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 09:52:46 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 09:54:04 UTC
Re: [CAD_CAM_EDM_DRO] Sinosidal Encoder signals to TTL signals converter
beerexalan
2005-12-30 13:02:41 UTC
Re: Sinosidal Encoder signals to TTL signals converter
bazer_20002000
2005-12-30 13:22:16 UTC
Re: Sinosidal Encoder signals to TTL signals converter
Alan Marconett
2005-12-30 13:41:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Jon Elson
2005-12-30 18:57:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
Thomas
2005-12-30 20:09:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter
chris morley
2006-01-01 11:27:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sinosidal Encoder signals to TTL signals converter