Re: [CAD_CAM_EDM_DRO] Backlash

hi jack-

the simplest way is to slit your brass nuts:

http://www.fignoggle.com/machines/x2mill/howTo-antiBacklashNut.htm

we've written a bunch of how-tos on this subject directly applicable to
the x2 but can be used in larger machines.

hope this helps!
david

--

Free photo storage for hobbyists - share pics! <http://www.hobbysnap.com>
MetalWorkingFAQ.NET - Over 50 content sites! <http://www.metalworkingfaq.net>
CNC, Plans/Kits, 8x12 Lathe, Mini-Mill, How-Tos <http://www.fignoggle.com>
Sieg X3/Super X3 Mill Information, HF/Enco Coupons <http://www.superx3.com>

On Mon, 14 Jan 2008, Jack Mc Kie wrote:

> I am in the process of retrofitting my X2 mini-mill with 269oz steppers
> controlled by a Xylotex controller and Mach3.
>
> I am looking for a cheap/simple way to reduce backlash on the X-Y axis.
> At present I have .005-.007" backlash in the X axis and .010 in the Y.
>
> Would it be reasonable, for light machining, to spring load the X-Y
> axis???
>
> Is there a simple way to modify the existing nuts to reduce backlash???
>
> Any suggestions???
>
> Jack
>
>
>