CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Re: greetings

Posted by ballendo@y...
on 2000-09-18 22:07:26 UTC
Darrell,

Could be. I went to a dos prompt(in win98) and did a "ping
www.ballscrews.com". Came back with 3 of 4 packets 25% loss,etc. BUT
the DNS was shown as: 205.178.180.102 So, I exited dos and in MSIE4
typed http://205.178.180.102 and got msg sez: That server is either
down or configured incorrectly.

Question. Why did my ping to w.bs.c result in a different DNS than
your post(repeated below)?

Thanks in advance.

Ballendo


>There may be a major upgrade happening on the DNS servers (Domain
>Name Server). There is a glitch with my main E mail server so my web
>host is having to relay my email. That is also caused by a problem
>with the DNS.
>Darrell

----- Original Message -----
From: ballendo@y...
To: CAD_CAM_EDM_DRO@egroups.com
Sent: Monday, September 18, 2000 9:34 PM
Subject: [CAD_CAM_EDM_DRO] Re: Re: greetings


>
> Thanks Darrell,
>
> That worked. Wonder why the "translation" isn't working? I've gone
to
> that site B4 MANY times using www.ballscrews.com. Any Ideas?
>
> Ballendo
>
>
>
> >For ballscrews.com type the following in the address bar instead of
> >www.ballscrews.com
>
> >209.219.67.162
>
> >that will get you there.
> >Darrell
>
>
>

Discussion Thread

Dan Dowell 2000-09-16 22:21:52 UTC Re: greetings Alvaro Fogassa 2000-09-16 23:28:25 UTC Re: greetings Tim Goldstein 2000-09-17 09:43:14 UTC #40 tapers? machines@n... 2000-09-17 13:36:42 UTC Re: #40 tapers? Ray 2000-09-17 15:48:48 UTC Re: greetings Alvaro Fogassa 2000-09-17 21:08:12 UTC Re: greetings ballendo@y... 2000-09-18 00:18:46 UTC Re: Re: greetings Ray 2000-09-18 07:35:34 UTC Re: Re: greetings Lee & Chris studley 2000-09-18 08:50:23 UTC Air assisted ball/screw on Z axis(table height) ? Alvaro Fogassa 2000-09-18 12:12:12 UTC Re: greetings JanRwl@A... 2000-09-18 17:24:56 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings JanRwl@A... 2000-09-18 17:26:29 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings JanRwl@A... 2000-09-18 17:39:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: greetings bfp 2000-09-18 17:57:01 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings dave engvall 2000-09-18 18:48:05 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings JanRwl@A... 2000-09-18 19:57:30 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Doug Warner 2000-09-18 19:57:44 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Mike Gann 2000-09-18 20:20:37 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings dave engvall 2000-09-18 20:25:19 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Darrell 2000-09-18 21:09:15 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings JanRwl@A... 2000-09-18 21:13:43 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Darrell 2000-09-18 21:26:35 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings ballendo@y... 2000-09-18 21:26:50 UTC Re: Re: greetings Darrell 2000-09-18 21:32:11 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings dave engvall 2000-09-18 21:34:54 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings ballendo@y... 2000-09-18 21:35:01 UTC Re: Re: greetings Dan Dowell 2000-09-18 21:39:31 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Darrell 2000-09-18 21:42:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: greetings ballendo@y... 2000-09-18 22:07:26 UTC Re: Re: Re: greetings Jon Elson 2000-09-18 22:26:48 UTC Re: [CAD_CAM_EDM_DRO] Re: greetings Darrell 2000-09-19 09:18:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: greetings Alan Marconett KM6VV 2000-09-19 10:33:47 UTC Re: greetings Alan Marconett KM6VV 2000-09-19 10:43:58 UTC Re: greetings JanRwl@A... 2000-09-19 20:48:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: greetings