Re: [CAD_CAM_EDM_DRO] Re: Re: Re: greetings
Posted by
Darrell
on 2000-09-19 09:18:22 UTC
Your ping was routed through your DNS and that is where the problem is.
Also,
I don't think that the number system works on AOL because they don't let
you
have direct access to the net. (Not for you Ballendo, for the AOLers)
Darrell
PS WHEN ARE THE ADDS GOING TO GO AWAY?
Also,
I don't think that the number system works on AOL because they don't let
you
have direct access to the net. (Not for you Ballendo, for the AOLers)
Darrell
PS WHEN ARE THE ADDS GOING TO GO AWAY?
> Darrell,
>
> Could be. I went to a dos prompt(in win98) and did a "ping
> www.ballscrews.com". Came back with 3 of 4 packets 25% loss,etc. BUT
> the DNS was shown as: 205.178.180.102 So, I exited dos and in MSIE4
> typed http://205.178.180.102 and got msg sez: That server is either
> down or configured incorrectly.
>
> Question. Why did my ping to w.bs.c result in a different DNS than
> your post(repeated below)?
>
> Thanks in advance.
>
> Ballendo
>
>
> >There may be a major upgrade happening on the DNS servers (Domain
> >Name Server). There is a glitch with my main E mail server so my web
> >host is having to relay my email. That is also caused by a problem
> >with the DNS.
> >Darrell
>
> ----- Original Message -----
> From: ballendo@y...
> To: CAD_CAM_EDM_DRO@egroups.com
> Sent: Monday, September 18, 2000 9:34 PM
> Subject: [CAD_CAM_EDM_DRO] Re: Re: greetings
>
>
Discussion Thread
Dan Dowell
2000-09-16 22:21:52 UTC
Re: greetings
Alvaro Fogassa
2000-09-16 23:28:25 UTC
Re: greetings
Tim Goldstein
2000-09-17 09:43:14 UTC
#40 tapers?
machines@n...
2000-09-17 13:36:42 UTC
Re: #40 tapers?
Ray
2000-09-17 15:48:48 UTC
Re: greetings
Alvaro Fogassa
2000-09-17 21:08:12 UTC
Re: greetings
ballendo@y...
2000-09-18 00:18:46 UTC
Re: Re: greetings
Ray
2000-09-18 07:35:34 UTC
Re: Re: greetings
Lee & Chris studley
2000-09-18 08:50:23 UTC
Air assisted ball/screw on Z axis(table height) ?
Alvaro Fogassa
2000-09-18 12:12:12 UTC
Re: greetings
JanRwl@A...
2000-09-18 17:24:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 17:26:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 17:39:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings
bfp
2000-09-18 17:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 18:48:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 19:57:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Doug Warner
2000-09-18 19:57:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Mike Gann
2000-09-18 20:20:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 20:25:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:09:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 21:13:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:26:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
ballendo@y...
2000-09-18 21:26:50 UTC
Re: Re: greetings
Darrell
2000-09-18 21:32:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 21:34:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
ballendo@y...
2000-09-18 21:35:01 UTC
Re: Re: greetings
Dan Dowell
2000-09-18 21:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:42:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings
ballendo@y...
2000-09-18 22:07:26 UTC
Re: Re: Re: greetings
Jon Elson
2000-09-18 22:26:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-19 09:18:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: greetings
Alan Marconett KM6VV
2000-09-19 10:33:47 UTC
Re: greetings
Alan Marconett KM6VV
2000-09-19 10:43:58 UTC
Re: greetings
JanRwl@A...
2000-09-19 20:48:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings