Re: greetings
Posted by
Alan Marconett KM6VV
on 2000-09-19 10:43:58 UTC
Cool!
I pinged www.ballscrews.com, 4 of 4, 0% error, 33ms! DNS was
209.219.67.162.
I'll have to remember that!
Alan
ballendo@... wrote:
I pinged www.ballscrews.com, 4 of 4, 0% error, 33ms! DNS was
209.219.67.162.
I'll have to remember that!
Alan
ballendo@... wrote:
> Darrell,
>
> Could be. I went to a dos prompt(in win98) and did a "ping
> www.ballscrews.com". Came back with 3 of 4 packets 25% loss,etc. BUT
> the DNS was shown as: 205.178.180.102 So, I exited dos and in MSIE4
> typed http://205.178.180.102 and got msg sez: That server is either
> down or configured incorrectly.
>
Discussion Thread
Dan Dowell
2000-09-16 22:21:52 UTC
Re: greetings
Alvaro Fogassa
2000-09-16 23:28:25 UTC
Re: greetings
Tim Goldstein
2000-09-17 09:43:14 UTC
#40 tapers?
machines@n...
2000-09-17 13:36:42 UTC
Re: #40 tapers?
Ray
2000-09-17 15:48:48 UTC
Re: greetings
Alvaro Fogassa
2000-09-17 21:08:12 UTC
Re: greetings
ballendo@y...
2000-09-18 00:18:46 UTC
Re: Re: greetings
Ray
2000-09-18 07:35:34 UTC
Re: Re: greetings
Lee & Chris studley
2000-09-18 08:50:23 UTC
Air assisted ball/screw on Z axis(table height) ?
Alvaro Fogassa
2000-09-18 12:12:12 UTC
Re: greetings
JanRwl@A...
2000-09-18 17:24:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 17:26:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 17:39:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings
bfp
2000-09-18 17:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 18:48:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 19:57:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Doug Warner
2000-09-18 19:57:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Mike Gann
2000-09-18 20:20:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 20:25:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:09:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
JanRwl@A...
2000-09-18 21:13:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:26:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
ballendo@y...
2000-09-18 21:26:50 UTC
Re: Re: greetings
Darrell
2000-09-18 21:32:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
dave engvall
2000-09-18 21:34:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
ballendo@y...
2000-09-18 21:35:01 UTC
Re: Re: greetings
Dan Dowell
2000-09-18 21:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-18 21:42:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings
ballendo@y...
2000-09-18 22:07:26 UTC
Re: Re: Re: greetings
Jon Elson
2000-09-18 22:26:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: greetings
Darrell
2000-09-19 09:18:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: greetings
Alan Marconett KM6VV
2000-09-19 10:33:47 UTC
Re: greetings
Alan Marconett KM6VV
2000-09-19 10:43:58 UTC
Re: greetings
JanRwl@A...
2000-09-19 20:48:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: greetings