Re: Quick Change Tooling
Posted by
Wally K
on 2000-10-30 09:30:44 UTC
Hi Joe:
I was thinking about building somthing like your description of the
impact wrench quick change. In your description you said a spring is
used to disengage the socket from the drawbar. is the mechanism used
to engage the socket a "bendix" type or is it simpiler.
Wally K.
I was thinking about building somthing like your description of the
impact wrench quick change. In your description you said a spring is
used to disengage the socket from the drawbar. is the mechanism used
to engage the socket a "bendix" type or is it simpiler.
Wally K.
--- In CAD_CAM_EDM_DRO@egroups.com, Joe Vicars <jvicars@c...> wrote:
> I missed most of this thread, so excuse my repeats.
> Most of the power drawbar retrofits are nothing more than an
impact
> wrench mounted to the top of the machine with a spring to disengage
the
> socket. Real quick change spindles do not operate on the same
principal
> as the R8
> Other "quick change" are collet adapters with R8 shanks. They
are
> quick because you don't have to mess with the drawbar once they are
> installed. But you do have to have a spindle break and use their
wrench
> and collets.
Discussion Thread
Joe Vicars
2000-10-30 08:23:32 UTC
Quick Change Tooling
Wally K
2000-10-30 09:30:44 UTC
Re: Quick Change Tooling
machines@n...
2000-10-30 10:21:48 UTC
Re: Quick Change Tooling
Joe Vicars
2000-10-30 10:48:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Smoke
2000-10-30 11:17:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Wally K
2000-10-30 13:54:02 UTC
Re: Quick Change Tooling
Wally K
2000-10-30 14:06:18 UTC
Re: Quick Change Tooling
ptengin@a...
2000-10-30 14:30:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Wally K
2000-10-30 14:48:33 UTC
Re: Quick Change Tooling
Fred Hansen
2000-10-30 15:39:04 UTC
Re: [CAD_CAM_EDM_DRO] Quick Change Tooling
John Stevenson
2000-10-30 17:18:49 UTC
Re: Quick Change Tooling
Wally K
2000-10-30 19:31:12 UTC
Re: Quick Change Tooling
Darrell
2000-10-30 20:07:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Jon Anderson
2000-10-30 20:25:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Smoke
2000-10-30 20:28:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
ptengin@a...
2000-10-31 01:02:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
ptengin@a...
2000-10-31 01:14:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Quick Change Tooling
Wally K
2000-10-31 01:15:22 UTC
Posting URL's and AOL
ptengin@a...
2000-10-31 01:48:37 UTC
Re: [CAD_CAM_EDM_DRO] Posting URL's and AOL
Wally K
2000-10-31 02:12:54 UTC
Re: Posting URL's and AOL
dave engvall
2000-10-31 07:42:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Posting URL's and AOL