Re: Quick Change Tooling

--- In CAD_CAM_EDM_DRO@egroups.com, ptengin@a... wrote:

> In a message dated 10/30/2000 12:09:08 PM Hawaiian Standard Time,
> cnc4me@u... writes:
>
> << Hi Joe:
>
> Are you trying to say the impact wrench is supported on a couple

of

> guide rails and slides up and down. And what controls the up and
> down movement, is it a lever you pull or an air cylinder. And

lastly

> is the end of the impact just a simple socket engaging the

standard

> draw bar. If this is the case then the impact must be started to
> register the socket with the nut to get them to engage.
>
> Wally K. >>
>
> Wally,
> Did a search of power draw bars on Dogpile.com. Came up with the

aussie

> web site. It has pictures and drawings of the devices in question.
>
>
> <A HREF="http://www.ismg4tools.com/html/aussie_udb.html>

">

> http://www.ismg4tools.com/html/aussie_udb.html</A>
>
>
> Try the above link.
>
> Ballendo, is this the way to post?
>
> Peter
> THRD, Inc.

Thanks for the link. And the first one did work the second one did
not. What you need to do is seperate the whole url with at least 1
space on each end. But the best way is to have the link on its own
line for readability. I would post your link as follows.

http://www.ismg4tools.com/html/aussie_udb.html

Notice i cut out everything not used in the URL in front and in back
of the URL. And also put a blank line above and below it for
readability.

Wally K.