CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw

Posted by Bill Phillips
on 2001-01-06 14:04:23 UTC
>Ballendo,
>
>The tips of the star are indeed conductive, but I'm thinking the three
>"arm" contacts need to be insulated from each other. 3 pole, single
>throw. Connect the switches in series. Otherwise, if sw 1 connects to
>sw 3, sw 2 can open, and not be seen.

True, the balls are all wired in series.

>
>I'm with you on the delrin body, and ball bearings, and depressions for
>the balls. the shape of the "star" may indeed be angled. I'm thinking
>of the "break water" cement pyramids, 4 legs, three of which are always
>down, one up. In our case turn it all upside down, the single arm now
>is thin and long, the other three angle up, and contact the three pairs
>of balls. But you've already imagined that also, right (the mind
>thing)! ;>)
>
>Alan KM6VV

You might want to rethink the Delrin. The stuff I have seen is too soft and
has poor temperature and moisture tolerance. For repeatability the balls
must be very rigid. Your material may be better than the sample I have so
by all means try it but don't expect too good a performance.

Regards
Bill Phillips

Discussion Thread

Alan Marconett KM6VV 2001-01-04 11:51:05 UTC Re: Digitizers, Renishaw PMeinhard@a... 2001-01-04 13:37:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Fred Smith 2001-01-04 14:40:26 UTC Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 15:32:53 UTC Re: Digitizers, Renishaw Smoke 2001-01-04 15:44:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 15:47:26 UTC Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 15:55:33 UTC Re: Digitizers, Renishaw Fred Smith 2001-01-04 16:07:56 UTC Re: Digitizers, Renishaw Ian Wright 2001-01-04 16:35:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw dave engvall 2001-01-04 17:17:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw dougrasmussen@c... 2001-01-04 18:16:20 UTC Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 18:39:08 UTC Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 18:47:22 UTC Re: Digitizers, Renishaw Fred Smith 2001-01-04 19:10:16 UTC Re: Digitizers, Renishaw Greg Nuspel 2001-01-04 19:18:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-04 20:48:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-01-04 21:16:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-01-04 21:27:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Jon Elson 2001-01-04 22:26:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw PMeinhard@a... 2001-01-05 03:53:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Ian Wright 2001-01-05 13:02:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-05 14:16:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Bill Phillips 2001-01-05 14:27:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw ballendo@y... 2001-01-05 15:01:44 UTC Re: Re: Digitizers, Renishaw ballendo@y... 2001-01-05 15:06:31 UTC re:Re: Digitizers, Renishaw ballendo@y... 2001-01-05 15:20:52 UTC Re: Re: Digitizers, Renishaw PMeinhard@a... 2001-01-05 15:34:13 UTC Digitizers, Renishaw Smoke 2001-01-05 15:44:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-05 15:45:45 UTC Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-05 15:50:07 UTC Re: Digitizers, Renishaw ballendo@y... 2001-01-05 15:55:04 UTC Re: Digitizers, Renishaw ballendo@y... 2001-01-05 16:51:51 UTC Re: Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-05 18:29:57 UTC Re: Digitizers, Renishaw Jeff Demand 2001-01-05 18:32:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Digitizers, Renishaw Tim Goldstein 2001-01-05 19:12:09 UTC What is everyone doing, building, wanting to learn? wanliker@a... 2001-01-05 20:06:43 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? JanRwl@A... 2001-01-05 20:12:16 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Jon Elson 2001-01-05 22:42:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Garry and Maxine 2001-01-06 11:55:25 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? ballendo@y... 2001-01-06 13:30:16 UTC re:RE: Re: Digitizers, Renishaw Tim Goldstein 2001-01-06 13:31:06 UTC RE: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? ballendo@y... 2001-01-06 13:55:21 UTC Re: Re: Digitizers, Renishaw Bill Phillips 2001-01-06 14:04:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Bill Phillips 2001-01-06 14:04:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Bill Phillips 2001-01-06 14:04:26 UTC Re: [CAD_CAM_EDM_DRO] Digitizers, Renishaw Garry and Maxine 2001-01-06 14:52:25 UTC RE: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Greg Nuspel 2001-01-06 14:59:51 UTC Re: [CAD_CAM_EDM_DRO] Digitizers, Renishaw Greg Nuspel 2001-01-06 15:03:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw wanliker@a... 2001-01-06 15:14:58 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? wally daniels 2001-01-06 15:38:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Garry and Maxine 2001-01-06 16:24:12 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Garry and Maxine 2001-01-06 16:27:39 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Alan Marconett KM6VV 2001-01-06 16:34:05 UTC Re: Digitizers, Renishaw ballendo@y... 2001-01-06 18:05:33 UTC re:Re: Digitizers, Renishaw wanliker@a... 2001-01-06 19:52:07 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Al Lenz 2001-01-06 21:05:32 UTC re:Re: Digitizers, Renishaw Garry and Maxine 2001-01-06 21:09:41 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Alan Marconett KM6VV 2001-01-06 21:58:01 UTC Re: Digitizers, Renishaw Smoke 2001-01-06 22:00:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw ballendo@y... 2001-01-06 23:40:11 UTC re:re:Re: Digitizers, Renishaw ballendo@y... 2001-01-07 01:09:34 UTC re:Re: Digitizers, Renishaw PMeinhard@a... 2001-01-07 01:34:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Ian Wright 2001-01-07 02:35:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Jeff Demand 2001-01-07 08:10:16 UTC Re: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Charli 2001-01-07 11:07:33 UTC RE: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? gmaithonis@y... 2001-01-07 11:17:28 UTC Re: What is everyone doing, building, wanting to learn? Tim Goldstein 2001-01-07 11:26:27 UTC RE: [CAD_CAM_EDM_DRO] What is everyone doing, building, wanting to learn? Jon Anderson 2001-01-07 11:29:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Tim Goldstein 2001-01-07 11:31:54 UTC RE: [CAD_CAM_EDM_DRO] Re: What is everyone doing, building, wanting to learn? Bill Phillips 2001-01-07 13:58:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Marcus & Eva 2001-01-08 08:05:28 UTC Re: [CAD_CAM_EDM_DRO] Re: What is everyone doing, building, wanting to learn? Drew Rogge 2001-01-08 08:18:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-08 11:29:26 UTC Re: Digitizers, Renishaw gmaithonis@y... 2001-01-08 16:46:08 UTC Re: What is everyone doing, building, wanting to learn? ballendo@y... 2001-01-08 17:21:34 UTC re:Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-09 00:25:56 UTC Re: Digitizers, Renishaw Ian Wright 2001-01-09 02:03:56 UTC Re: [CAD_CAM_EDM_DRO] re:Re: Digitizers, Renishaw Roman Black 2001-01-09 02:45:33 UTC Re: Digitizers, Renishaw John Wettroth 2001-01-09 09:25:12 UTC RE: What is everyone doing, building, wanting to learn? Alan Marconett KM6VV 2001-01-09 10:26:45 UTC Re: Digitizers, Renishaw Bruce 2001-01-09 15:56:41 UTC Re: What is everyone doing, building, wanting to learn? John D. Guenther 2001-01-10 09:49:42 UTC Re: What is everyone doing, building, wanting to learn? Jon Elson 2001-01-10 22:45:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Roman Black 2001-01-11 11:39:15 UTC Re: Digitizers, Renishaw Jon Elson 2001-01-11 12:02:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Alan Marconett KM6VV 2001-01-11 12:33:11 UTC Re: Digitizers, Renishaw ballendo@y... 2001-01-11 12:58:57 UTC re:Re: What is everyone doing, building, wanting to learn? John D. Guenther 2001-01-11 13:31:18 UTC re:Re: What is everyone doing, building, wanting to learn? Ian Wright 2001-01-11 15:17:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Marcus & Eva 2001-01-11 21:30:37 UTC Re: [CAD_CAM_EDM_DRO] re:Re: What is everyone doing, building, wanting to learn? Smoke 2001-01-11 21:45:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Ian Wright 2001-01-12 02:47:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Roman Black 2001-01-12 05:24:23 UTC Re: Digitizers, Renishaw Roman Black 2001-01-12 06:23:38 UTC Re: Digitizers, Renishaw Jon Anderson 2001-01-12 08:02:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-01-12 09:29:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Jon Elson 2001-01-12 11:51:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-01-12 12:25:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Ian Wright 2001-01-12 13:47:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-01-12 14:24:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw ballendo@y... 2001-01-12 19:03:48 UTC re:Re: Digitizers, Renishaw ballendo@y... 2001-01-12 19:21:45 UTC re:Re: Digitizers, Renishaw Jon Anderson 2001-01-12 19:28:06 UTC Re: [CAD_CAM_EDM_DRO] re:Re: Digitizers, Renishaw ballendo@y... 2001-01-12 21:35:53 UTC Re: re:Re: Digitizers, Renishaw dave engvall 2001-01-14 08:58:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Smoke 2001-08-13 15:49:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Jon Elson 2001-08-13 23:08:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw Bill McGown 2001-08-14 06:03:41 UTC Re: Digitizers, Renishaw Smoke 2001-08-14 07:03:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw diazden 2001-08-14 08:17:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizers, Renishaw