CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Moglice

Posted by Doug Harrison
on 2001-08-14 15:57:10 UTC
> >Has anyone tried a homebrew imitation of Moglice? Did it work? What was
> >used?
>
> I tried using WEST epoxy and powdered graphite. I had some on hand left
> over from the teak decks on my steamboat. The mix cured fine, and seemed
> very slippery, but my thread was to rough and the mix hung on to tight.
> I had to carve it off with a Dremel cutoff wheel.

More than one machine tool rebuilder can tell you what happens if you don't
use enough release agent making Moglice nuts. It's kind of like your first
attempt to soft boil an egg in a microwave - a bad experience, only more
expensive to fix.

Doug

Discussion Thread

Robert 2000-05-16 15:51:15 UTC Moglice Ken Jenkins 2000-09-19 09:04:16 UTC Re: Moglice dougrasmussen@c... 2000-09-19 09:43:20 UTC Re: Moglice Ron Ginger 2000-09-19 09:56:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice Ron Ginger 2000-09-19 10:01:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice Tim Goldstein 2000-09-19 17:18:48 UTC RE: [CAD_CAM_EDM_DRO] Re: Moglice ptengin@a... 2000-09-19 20:04:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice ron ginger 2001-08-14 15:29:34 UTC Re: Moglice Doug Harrison 2001-08-14 15:57:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice Sven Peter 2001-08-14 17:12:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice brian 2001-08-14 17:45:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Moglice M. SHABBIR MOGHUL 2001-08-15 04:10:21 UTC EDMcoolent M. SHABBIR MOGHUL 2001-08-15 04:10:26 UTC Carbide cutting on EDM Marcus & Eva 2001-08-15 18:24:11 UTC Re: [CAD_CAM_EDM_DRO] EDMcoolent diazden 2001-08-15 21:10:12 UTC Re: [CAD_CAM_EDM_DRO] EDMcoolent M. SHABBIR MOGHUL 2001-08-16 21:29:41 UTC Re: [CAD_CAM_EDM_DRO] EDMcoolent M. SHABBIR MOGHUL 2001-08-16 21:29:55 UTC Re: [CAD_CAM_EDM_DRO] EDMcoolent JanRwl@A... 2001-08-17 17:52:03 UTC Re: [CAD_CAM_EDM_DRO] EDMcoolent ccs@m... 2001-10-26 14:50:46 UTC Moglice andy@o... 2001-10-26 15:17:17 UTC Re: Moglice Sven Peter 2001-10-26 18:14:54 UTC Re: [CAD_CAM_EDM_DRO] Moglice Carey L. Culpepper 2001-10-26 20:47:53 UTC Re: [CAD_CAM_EDM_DRO] Moglice ccs@m... 2001-10-26 21:25:46 UTC Re: [CAD_CAM_EDM_DRO] Moglice Randy Gordon-Gilmore 2002-10-18 15:44:40 UTC Moglice Scot Rogers 2002-10-19 11:07:35 UTC [CAD_CAM_EDM_DRO]polymer concrete Marv Frankel 2002-10-19 11:21:24 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete Tim Goldstein 2002-10-19 11:21:38 UTC RE: [CAD_CAM_EDM_DRO]polymer concrete Scot Rogers 2002-10-19 11:29:41 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete JanRwl@A... 2002-10-19 14:34:49 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete Brian 2002-10-19 15:46:59 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete William Scalione 2002-10-19 15:54:44 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete William Scalione 2002-10-20 12:50:39 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete Brian 2002-10-21 16:39:35 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete Doug Harrison 2002-10-21 19:05:51 UTC Re: [CAD_CAM_EDM_DRO]polymer concrete wanliker@a... 2002-10-22 01:04:20 UTC polymer concrete Randy Gordon-Gilmore 2003-01-06 22:31:44 UTC Moglice Ron Ginger 2004-08-26 15:38:30 UTC Re: Moglice