Re: [CAD_CAM_EDM_DRO] EDMcoolent
Posted by
Marcus & Eva
on 2001-08-15 18:24:11 UTC
Hi Shabbir:
Use a proper EDM dielectric oil for ram type EDM work.
A good brand is Rustlick 30.
DO NOT use deodorized kerosene. It is very dangerous.
Cheers
Marcus
-----Original Message-----
From: M. SHABBIR MOGHUL <shabm@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Wednesday, August 15, 2001 4:10 AM
Subject: [CAD_CAM_EDM_DRO] EDMcoolent
Use a proper EDM dielectric oil for ram type EDM work.
A good brand is Rustlick 30.
DO NOT use deodorized kerosene. It is very dangerous.
Cheers
Marcus
-----Original Message-----
From: M. SHABBIR MOGHUL <shabm@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Wednesday, August 15, 2001 4:10 AM
Subject: [CAD_CAM_EDM_DRO] EDMcoolent
>HI all
>can any body tell me about best coolent for EDM?
>
>
>shabbir
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
Robert
2000-05-16 15:51:15 UTC
Moglice
Ken Jenkins
2000-09-19 09:04:16 UTC
Re: Moglice
dougrasmussen@c...
2000-09-19 09:43:20 UTC
Re: Moglice
Ron Ginger
2000-09-19 09:56:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
Ron Ginger
2000-09-19 10:01:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
Tim Goldstein
2000-09-19 17:18:48 UTC
RE: [CAD_CAM_EDM_DRO] Re: Moglice
ptengin@a...
2000-09-19 20:04:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
ron ginger
2001-08-14 15:29:34 UTC
Re: Moglice
Doug Harrison
2001-08-14 15:57:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
Sven Peter
2001-08-14 17:12:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
brian
2001-08-14 17:45:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moglice
M. SHABBIR MOGHUL
2001-08-15 04:10:21 UTC
EDMcoolent
M. SHABBIR MOGHUL
2001-08-15 04:10:26 UTC
Carbide cutting on EDM
Marcus & Eva
2001-08-15 18:24:11 UTC
Re: [CAD_CAM_EDM_DRO] EDMcoolent
diazden
2001-08-15 21:10:12 UTC
Re: [CAD_CAM_EDM_DRO] EDMcoolent
M. SHABBIR MOGHUL
2001-08-16 21:29:41 UTC
Re: [CAD_CAM_EDM_DRO] EDMcoolent
M. SHABBIR MOGHUL
2001-08-16 21:29:55 UTC
Re: [CAD_CAM_EDM_DRO] EDMcoolent
JanRwl@A...
2001-08-17 17:52:03 UTC
Re: [CAD_CAM_EDM_DRO] EDMcoolent
ccs@m...
2001-10-26 14:50:46 UTC
Moglice
andy@o...
2001-10-26 15:17:17 UTC
Re: Moglice
Sven Peter
2001-10-26 18:14:54 UTC
Re: [CAD_CAM_EDM_DRO] Moglice
Carey L. Culpepper
2001-10-26 20:47:53 UTC
Re: [CAD_CAM_EDM_DRO] Moglice
ccs@m...
2001-10-26 21:25:46 UTC
Re: [CAD_CAM_EDM_DRO] Moglice
Randy Gordon-Gilmore
2002-10-18 15:44:40 UTC
Moglice
Scot Rogers
2002-10-19 11:07:35 UTC
[CAD_CAM_EDM_DRO]polymer concrete
Marv Frankel
2002-10-19 11:21:24 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
Tim Goldstein
2002-10-19 11:21:38 UTC
RE: [CAD_CAM_EDM_DRO]polymer concrete
Scot Rogers
2002-10-19 11:29:41 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
JanRwl@A...
2002-10-19 14:34:49 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
Brian
2002-10-19 15:46:59 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
William Scalione
2002-10-19 15:54:44 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
William Scalione
2002-10-20 12:50:39 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
Brian
2002-10-21 16:39:35 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
Doug Harrison
2002-10-21 19:05:51 UTC
Re: [CAD_CAM_EDM_DRO]polymer concrete
wanliker@a...
2002-10-22 01:04:20 UTC
polymer concrete
Randy Gordon-Gilmore
2003-01-06 22:31:44 UTC
Moglice
Ron Ginger
2004-08-26 15:38:30 UTC
Re: Moglice