Re: [CAD_CAM_EDM_DRO] Re: Moglice

I used Teflon loaded delrin and did the same thing with the turret on a 2g
browne and sharp turret(screw machine) so they could finnish the job. the
machine was slated to be replaced but i did that 6 years ago and that old
girl is still cutting blank shafts!!!!

----- Original Message -----
From: "Sven Peter" <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, August 14, 2001 7:11 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Moglice


> A friend who sold me his surface grinder simply put
> teflon stripes between the bed ways, shimmed it out and fixed the location
> with stub screws. I can tell you it works well and there is no
> wear on the bed ways. And sometimes it works very hard.
> Just my 2 cent idea.
> Sven Peter
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>