RE: [CAD_CAM_EDM_DRO] Re: RE: study, study, study smdromod

I installed from the newest BDI (1.09 or something) and it worked fine.
Ray's tarball also installed and worked OK.

Tim
[Denver, CO]

> -----Original Message-----
> Ray I had that problem with both the newer downloadable BDI and with your
> tarball. First I tried the newer BDI on a clean disk and had the "Can't
> connect
> to emc" error, so I tried the tarball on the original BDI with the same
> results.
>
> One thing I noticed was the newer BDI went to a different
> directory than the
> original BDI and when I installed the tarball I put that into a different
> directory
> than the original BDI. Neither would run, but when I installed the tarball
> over
> the original BDI in the /usr/local/emc directory, it worked fine. Was the
> fix
> just a path problem?
>
> Bill
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>