Re: [CAD_CAM_EDM_DRO] study, study, study
Posted by
Weyland
on 2001-08-16 23:18:04 UTC
From: "Jon Elson" <elson@...>
Gotcha.
but I can see my unborn child's tuition going out the
window quickly here with all the things I *could* do... LOL~! (:>)
Weyland
> > What's a deadband?<ding!> <lightbulb appears overhead>
>
> In this narrow sense, it is an amount of error between commanded position
> and actual position which will not cause the CNC control to attempt to
> reduce the error. it is essentially a "close enough" decision.
Gotcha.
> > > You will need an encoder counter. The cheapest is the Dan MauchI checked these out, and it's certainly appealing,
> > > DRO, which I believe requires an ISA slot in the computer.
but I can see my unborn child's tuition going out the
window quickly here with all the things I *could* do... LOL~! (:>)
Weyland
Discussion Thread
Weyland
2001-08-16 18:50:03 UTC
study, study, study
Tim Goldstein
2001-08-16 19:26:27 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study
Jon Elson
2001-08-16 21:15:21 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Weyland
2001-08-16 21:27:42 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Weyland
2001-08-16 21:36:28 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Tim Goldstein
2001-08-16 22:04:37 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study
Weyland
2001-08-16 22:19:26 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Tim Goldstein
2001-08-16 22:38:54 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study
Jon Elson
2001-08-16 23:08:50 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Weyland
2001-08-16 23:18:04 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Jon Elson
2001-08-16 23:19:35 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study
Paul
2001-08-17 12:04:38 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study smdromod
Tim
2001-08-17 12:26:06 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study smdromod
Paul
2001-08-17 15:15:44 UTC
RE: [CAD_CAM_EDM_DRO] study, study, study smdromod
Paul
2001-08-17 15:15:46 UTC
Re: [CAD_CAM_EDM_DRO] study, study, study Documentation
Ray
2001-08-17 20:36:07 UTC
Re: RE: study, study, study smdromod
Weyland
2001-08-18 09:45:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: study, study, study smdromod
William Scalione
2001-08-18 17:08:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: study, study, study smdromod
William Scalione
2001-08-18 17:58:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: study, study, study smdromod
Tim Goldstein
2001-08-18 18:09:00 UTC
RE: [CAD_CAM_EDM_DRO] Re: RE: study, study, study smdromod
Weyland
2001-08-18 21:03:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: RE: study, study, study smdromod
Tim Goldstein
2001-08-18 21:24:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Re: RE: study, study, study smdromod
Jon Elson
2001-08-18 23:14:11 UTC
Re: study, study, study smdromod
Weyland
2001-08-18 23:19:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: study, study, study smdromod
Weyland
2001-08-18 23:35:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: study, study, study smdromod
Bryan-TheBS-Smith
2001-08-19 05:30:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: study, study, study smdromod
Ray
2001-08-19 06:51:38 UTC
Re: RE: Re: RE: study, study, study smdromod
Weyland
2001-08-19 09:18:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: RE: study, study, study smdromod
Ray
2001-08-19 13:20:23 UTC
Re: Re: Re: Re: Re: RE: study, study, study smdromod