RE: [CAD_CAM_EDM_DRO] Gecko 201 drive

How about a multi pole switch with different resistor values for each
machine?

Just thinking out loud...
Bryan

-----Original Message-----
From: Ron Kline [mailto:ulpilots@...]
Sent: Saturday, 08 December, 2001 10:33 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Gecko 201 drive


The 201 uses a 1/4 watt resister to set the output
current , do any of you know if I could use a pot
instead so I can change the out put when I'm using the
drivers on my other machines .
Thanks
Ron K

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/