Re: I want to upgrade to servors/ EMM386.EXE

I checked my two computers and there is not such line that call
EMM386.EXE on my CONFIG.SYS file..

The following is the copy of the CONFIG.SYS:

[menu]
menuitem=HELP, Help
menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menuitem=QUICK, Minimal Boot
menudefault=HELP,30
menucolor=7,0

[HELP]
device=oakcdrom.sys /D:mscd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:mscd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:mscd001
devicehigh=ramdrive.sys /E 2048

[CD]
device=oakcdrom.sys /D:mscd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:mscd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:mscd001
devicehigh=ramdrive.sys /E 2048


there is not a line calling EMM386.exe

--- In CAD_CAM_EDM_DRO@y..., "dave_ace_me" <davemucha@j...> wrote:
> > I have win 98 so I do not know what Dos version
> > I have, I think it is 6.0..
>
> if you are using the win 98 dos, you have win 98 dos,
> if you are dual booting you may have a different dos.
>
> at the dos prompt, type ver to get the version you are running.
>
> and if you are using windoz of any sort, you do have a config.sys
and
> autoexec.bat file that runs when you open a dos window, or when you
> boot to dos either before windoz opens or when you shutdown-reboot
to
> dos.
>
> but do note you can have different settings for each dos window you
> open. to do that, make a shortcut on you desktop and you can
select
> properties and modify those settings for that shortcut to dos
window.
>
> Dave
>
>
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "luisguillermo98"
<luisguillermo98@y...>
> wrote:
> > yes you right;
> > the REM is a BASIC statement for comment.. how did you find out
> that
> > the EMM.EXE was the problem? so what could be the top speed I can
> get
> > after editing the conf.ini file?
> > I have win 98 so I do not know what Dos version I have, I think
it
> is
> > 6.0.. i'll try that and let you know so others people can benefit
> > from this...
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "Michael Milligan" <mmmilligan@f...>
> > wrote:
> > >
> > > EMM386.EXE is used by MSDOS as an Extended Memory Manager and
is
> > > required by quite a few DOS applications which use memory
outside
> > > the standard DOS segment.
> > >
> > > Adding the word 'REM ' at the start of the line will convert the
> > > line from being a Code line to being a Comment line. EMM386.EXE
> > > will not be configured and any reliant DOS application will
cease
> > > to operate.
> > >
> > > Regards
> > > Michael
> > >
> > > -----Original Message-----
> > > From: Carol & Jerry Jankura [mailto:jerry.jankura@s...]
> > > Sent: 16 February 2002 09:07
> > > To: CAD_CAM_EDM_DRO@y...
> > > Subject: RE: [CAD_CAM_EDM_DRO] Re: I want to upgrade to servors
> > >
> > >
> > > Neither, I just commented the line that invokes it in
CONFIG.SYS.
> > Don't
> > > delete it, as you might want it for other applications of the
> > computer.
> > > Simply open CONFIG.SYS in your editor and add the word "rem "
at
> > the start
> > > of the line that calls EMM386.EXE.
> > >
> > > |I think that is a file used for MsDos.. do you deleted or edit
> it?
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/