Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
Posted by
Mike Snodgrass
on 2002-04-12 08:58:05 UTC
----- Original Message -----
From: "Sven Peter" <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, April 12, 2002 7:11 AM
Subject: Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
I have, and I know you can get long " bellows" type protectors in many
sizes. They are used to protect hydraulic cylinder shafts, I think they
are expensive though it would be easy for a woman with a sewing machine and
some good apolstery material. You can get the new ones from a hydraulic
dealer.
> Hello Doug,
> You can put tubing together but travel might pet reduced.
> Kabelschlepp and others sell cylindrical springs.
> "Steel, Hilton" <HSteel@...>
> You might be able to make some out of very wide packing steel band like
> for
> transport boxes. But I tell you ITS NASTY. I had to do something
> simmilar for
> to substitute drill press springs. Therefor I prefer to buy the stuff.
> Good luck
> Sven Peter
>
> Doug Fortune wrote:
> >
> > dave_ace_me wrote:
> >
> > > btw, on my table, I am using a single lead screw, under the table,
> > > with telescoping tubing as protection. This is very simple and well
> > > worth the effort to keep chips clear.
> >
> > Hi Dave:
> >
> > I'd be interesting in hearing more about how you made those
> > telescoping tubes. I think Reid sells nested sets of aluminum
> > tubes, but how do you get them to not pull completely apart?
> >
> > Doug Fortune
> > http://www.cncKITS.com NEW -> 1KW power supply kits
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Doug Fortune
2002-04-11 22:21:23 UTC
telescoping leadscrew protectors
dave_ace_me
2002-04-12 05:22:39 UTC
Re: telescoping leadscrew protectors
Sven Peter
2002-04-12 07:07:34 UTC
Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
Mike Snodgrass
2002-04-12 08:58:05 UTC
Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
rsgoldner
2002-04-12 09:33:33 UTC
Re: telescoping leadscrew protectors
dave_ace_me
2002-04-12 09:57:46 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors
Alan Marconett KM6VV
2002-04-12 10:33:09 UTC
Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
Mike Snodgrass
2002-04-12 10:47:31 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
Jon Elson
2002-04-12 11:12:47 UTC
Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
Jon Elson
2002-04-12 11:15:03 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
studleylee
2002-04-12 15:17:51 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors
Jerry Biehler
2002-04-12 16:51:05 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
Brian Pitt
2002-04-12 20:23:02 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
Brian Pitt
2002-04-12 20:37:35 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
Paul Weber
2002-04-12 22:35:29 UTC
Re: [CAD_CAM_EDM_DRO] telescoping leadscrew protectors
Jon Elson
2002-04-12 22:35:55 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
Tom Kahara
2002-04-13 12:38:30 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
ballendo
2002-04-15 05:55:08 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors
ballendo
2002-04-15 06:27:35 UTC
more leadscrew protectors ( was Re: telescoping leadscrew protectors
Peter
2002-04-15 07:49:23 UTC
Re: [CAD_CAM_EDM_DRO] more leadscrew protectors ( was Re: telescoping leadscrew protectors
Alan Marconett KM6VV
2002-04-15 11:12:15 UTC
Re: [CAD_CAM_EDM_DRO] more leadscrew protectors ( was Re: telescoping leadscrew protectors
aspaguy
2002-04-15 21:17:28 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors
dave_ace_me
2002-04-16 13:48:33 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors
Jon Elson
2002-04-16 23:43:44 UTC
Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors
ballendo
2002-04-17 02:19:48 UTC
leadscrew protectors ( was Re: telescoping leadscrew protectors