Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping leadscrew protectors

How about a roll up window shade? Could replace the fabric with heavy duty
aluminum foil like on fiberglass insulation. Should be cheap enough.

----- Original Message -----
From: "Jerry Biehler" <j.biehler@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, April 12, 2002 7:25 PM
Subject: Re: [CAD_CAM_EDM_DRO] leadscrew protectors ( was Re: telescoping
leadscrew protectors


>
> On Friday, April 12, 2002, at 02:36 PM, studleylee wrote:
>
> > Hi,
> > As a long shot, how about automotive shock absorber booting connected
> > end to end.
> > -Lee
>
> Ot the boots for rack and pinion steering. They have a longer throw.
>
> -Jerry
> >
> > --- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> >> dave_ace_me wrote:
> >>
> >>> I agree, some parts of this business is just womens work. :" )
> >>>
> >>> I looked at using a self winding roll to be uded to keep the chips
> >>> away but that was a flat top and would actually hold the small
> > chips
> >>> until it would pass some sort of angle to let them fall.
> >>>
> >>> My chips are cold, so plastic or rubber would work but I did not
> > like
> >>> the cost of the rubber bellows. I tried to find some from a TV
> > Dish
> >>> style linear actuator, nice length, but they seem to range around
> >>> $20.00 a foot for the stuff.
> >>
> >> This sounds much better than Goretite, about $100 a foot.
> >>
> >> Jon
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> > it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same memembers are there,
> > for OT subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>