RE: [CAD_CAM_EDM_DRO] HP 7475A

If I can get hold of one of these plotters I'm going to try ands make a
solder paste dispenser machine for SMT pcbs. The idea is to use a commercial
solder paste dispenser such as;
http://www.zeph.com/zt-5100.htm

The dispensing nozzle should be light enough. All I need to go now is find a
source for the plotter in Oz. (hint, hint)

Cheers,

Peter Homann
<mailto:peter.homann@...>
Work : +61 3 8530-7755
Adacel Technologies Ltd Fax : +61 3 9596-2960
250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile : 0421 601665
http://www.adacel.com.au Australian Software Engineering Excellence

> -----Original Message-----
> From: eggpoodle [mailto:eggpoodle@...]
> Sent: Monday, 6 May 2002 12:18 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] HP 7475A
>
>
> I am new to this group, and have interest in making a CNC for use in
> architectural model making and possibly wood work (canoes, curved
> things)
>
> I have access to about 9 Hewlett Packard 7475A pen plotters (11X17"
> capacity, 6 or so pens). Are these units useful for making a small
> machinge, perhaps using a dremel or similar for cutter?, or are the
> motors too light duty for the job?
>
> Also, any idea what a fair price is for them if working? (they are
> pre-1990, and use an off-base serial connector)
>
> I'll watch this thread, and can be directly emailed at hdesign@...
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this as a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on
> the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@...
> [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>