CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod

Posted by Marcus & Eva
on 2002-05-07 18:48:43 UTC
Hi Ray:
Yup, you are right.
I must have hard faced a million backhoe buckets with Stellite when I was a
welder back one summer in the '70s.
Stellite was used for turning tools until the widespread availability of
carbides pretty much made it obsolete for metalworking tools.
Cheers

Marcus

----- Original Message -----
From: "Raymond Heckert" <jnr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, May 07, 2002 9:09 AM
Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod


> I thought they were used as 'hard-facing' rods for things like rock
> crushing rolls and some mining/excavating equipment.
>
> RayHex
>
> ----------
> > From: Jon Elson <elson@...>
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
> > Date: Tuesday, May 07, 2002 12:22 AM
> >
> > Peter Homann wrote:
> >
> > > Hi,
> > >
> > > Does anybody know what this is and is it useful? I can get a couple of
> > > pieces.
> >
> > Sure. This is the original "hardmetal" cutting tool material from the
> 1950s.
> > You can grind them to make cutting tools, boring bars, etc.
> >
> > Jon
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

eggpoodle 2002-05-05 07:55:24 UTC HP 7475A Hugh Prescott 2002-05-05 09:59:33 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Scott Hendershot 2002-05-05 10:05:20 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A wayne_j_hill 2002-05-05 10:13:23 UTC Re: HP 7475A eggpoodle 2002-05-05 10:17:51 UTC Re: HP 7475A Brian Pitt 2002-05-05 11:00:32 UTC Re: [CAD_CAM_EDM_DRO] Re: HP 7475A Hugh Prescott 2002-05-05 12:09:14 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Doug Harrison 2002-05-05 13:56:54 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A dave_ace_me 2002-05-05 17:39:16 UTC a good use for a HP 7475A Henry H. Armstrong 2002-05-05 20:50:59 UTC Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A Peter Homann 2002-05-05 20:54:17 UTC RE: [CAD_CAM_EDM_DRO] HP 7475A Paul Weber 2002-05-05 23:54:36 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A dave_ace_me 2002-05-06 04:23:50 UTC Re: a good use for a HP 7475A Raymond Heckert 2002-05-06 09:20:35 UTC Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A Peter Homann 2002-05-06 14:35:36 UTC RE: [CAD_CAM_EDM_DRO] HP 7475A Peter Homann 2002-05-06 15:09:58 UTC Stellite Super Hard Alloy Cast Rod Brian 2002-05-06 19:04:28 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Paul Weber 2002-05-06 19:11:06 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Jon Elson 2002-05-06 22:08:16 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Sven Peter 2002-05-07 06:26:09 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Raymond Heckert 2002-05-07 10:04:42 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Marcus & Eva 2002-05-07 18:48:43 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Jon Elson 2002-05-07 22:05:08 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Brian 2002-05-08 17:01:15 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Dave Engvall 2002-06-21 22:21:30 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Jon Elson 2002-06-21 22:57:05 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod