Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod

Hi all,

"stellite 6" is most popular alloy and is Co with Ni 2, Fe 2, C 1.2, Cr 29,
Mn 1, Mo 0.6 Si 1.4 and W 4.5. Not an inexpensive alloy. Suspect Toshiba
Tungalloy is similar. Was great stuff in the 50's and 60's.

dave

On 5/8/02 5:06 PM, "Brian" <ka1bbg@...> wrote:

> Ahh, forgot about "Stoody hard face rods"yep, had chunks of stellite hanging
> out the side of the rod.!.cul brian f.
> ----- Original Message -----
> From: "Marcus & Eva" <implmex@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, May 07, 2002 9:54 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
>
>
>> Hi Ray:
>> Yup, you are right.
>> I must have hard faced a million backhoe buckets with Stellite when I was
> a
>> welder back one summer in the '70s.
>> Stellite was used for turning tools until the widespread availability of
>> carbides pretty much made it obsolete for metalworking tools.
>> Cheers
>>
>> Marcus
>>
>> ----- Original Message -----
>> From: "Raymond Heckert" <jnr@...>
>> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>> Sent: Tuesday, May 07, 2002 9:09 AM
>> Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
>>
>>
>>> I thought they were used as 'hard-facing' rods for things like rock
>>> crushing rolls and some mining/excavating equipment.
>>>
>>> RayHex
>>>
>>> ----------
>>>> From: Jon Elson <elson@...>
>>>> To: CAD_CAM_EDM_DRO@yahoogroups.com
>>>> Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
>>>> Date: Tuesday, May 07, 2002 12:22 AM
>>>>
>>>> Peter Homann wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> Does anybody know what this is and is it useful? I can get a couple
> of
>>>>> pieces.
>>>>
>>>> Sure. This is the original "hardmetal" cutting tool material from the
>>> 1950s.
>>>> You can grind them to make cutting tools, boring bars, etc.
>>>>
>>>> Jon
>>>>
>>>>
>>>> Addresses:
>>>> FAQ: http://www.ktmarketing.com/faq.html
>>>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>>>
>>>> OFF Topic POSTS: General Machining
>>>> If you wish to post on unlimited OT subjects goto:
>>> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>> if
>>> you have trouble.
>>>> http://www.metalworking.com/news_servers.html
>>>>
>>>> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
>>> sister site to the CCED group, as many of the same members are there,
> for
>>> OT subjects, that are not allowed on the CCED list.
>>>>
>>>>
>>>>
>>>> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>>>> Moderator: jmelson@... timg@... [Moderator]
>>>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>>> bill,
>>>> List Mom
>>>> List Owner
>>>>
>>>>
>>>>
>>>> Your use of Yahoo! Groups is subject to
>> http://docs.yahoo.com/info/terms/
>>>
>>>>
>>>
>>> Addresses:
>>> FAQ: http://www.ktmarketing.com/faq.html
>>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>>
>>> OFF Topic POSTS: General Machining
>>> If you wish to post on unlimited OT subjects goto:
>> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
>> you have trouble.
>>> http://www.metalworking.com/news_servers.html
>>>
>>> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
>> sister site to the CCED group, as many of the same members are there, for
> OT
>> subjects, that are not allowed on the CCED list.
>>>
>>>
>>>
>>> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>>> Moderator: jmelson@... timg@... [Moderator]
>>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>> bill,
>>> List Mom
>>> List Owner
>>>
>>>
>>>
>>> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>>>
>>
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>
>> OFF Topic POSTS: General Machining
>> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
>> http://www.metalworking.com/news_servers.html
>>
>> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>>
>>
>>
>> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> Moderator: jmelson@... timg@... [Moderator]
>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> bill,
>> List Mom
>> List Owner
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
> site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>