Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Posted by
Brian
on 2002-05-08 17:01:15 UTC
Ahh, forgot about "Stoody hard face rods"yep, had chunks of stellite hanging
out the side of the rod.!.cul brian f.
out the side of the rod.!.cul brian f.
----- Original Message -----
From: "Marcus & Eva" <implmex@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, May 07, 2002 9:54 PM
Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
> Hi Ray:
> Yup, you are right.
> I must have hard faced a million backhoe buckets with Stellite when I was
a
> welder back one summer in the '70s.
> Stellite was used for turning tools until the widespread availability of
> carbides pretty much made it obsolete for metalworking tools.
> Cheers
>
> Marcus
>
> ----- Original Message -----
> From: "Raymond Heckert" <jnr@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, May 07, 2002 9:09 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
>
>
> > I thought they were used as 'hard-facing' rods for things like rock
> > crushing rolls and some mining/excavating equipment.
> >
> > RayHex
> >
> > ----------
> > > From: Jon Elson <elson@...>
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
> > > Date: Tuesday, May 07, 2002 12:22 AM
> > >
> > > Peter Homann wrote:
> > >
> > > > Hi,
> > > >
> > > > Does anybody know what this is and is it useful? I can get a couple
of
> > > > pieces.
> > >
> > > Sure. This is the original "hardmetal" cutting tool material from the
> > 1950s.
> > > You can grind them to make cutting tools, boring bars, etc.
> > >
> > > Jon
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there,
for
> > OT subjects, that are not allowed on the CCED list.
> > >
> > >
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> > >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Discussion Thread
eggpoodle
2002-05-05 07:55:24 UTC
HP 7475A
Hugh Prescott
2002-05-05 09:59:33 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
Scott Hendershot
2002-05-05 10:05:20 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
wayne_j_hill
2002-05-05 10:13:23 UTC
Re: HP 7475A
eggpoodle
2002-05-05 10:17:51 UTC
Re: HP 7475A
Brian Pitt
2002-05-05 11:00:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: HP 7475A
Hugh Prescott
2002-05-05 12:09:14 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
Doug Harrison
2002-05-05 13:56:54 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
dave_ace_me
2002-05-05 17:39:16 UTC
a good use for a HP 7475A
Henry H. Armstrong
2002-05-05 20:50:59 UTC
Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A
Peter Homann
2002-05-05 20:54:17 UTC
RE: [CAD_CAM_EDM_DRO] HP 7475A
Paul Weber
2002-05-05 23:54:36 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
dave_ace_me
2002-05-06 04:23:50 UTC
Re: a good use for a HP 7475A
Raymond Heckert
2002-05-06 09:20:35 UTC
Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A
Peter Homann
2002-05-06 14:35:36 UTC
RE: [CAD_CAM_EDM_DRO] HP 7475A
Peter Homann
2002-05-06 15:09:58 UTC
Stellite Super Hard Alloy Cast Rod
Brian
2002-05-06 19:04:28 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Paul Weber
2002-05-06 19:11:06 UTC
Re: [CAD_CAM_EDM_DRO] HP 7475A
Jon Elson
2002-05-06 22:08:16 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Sven Peter
2002-05-07 06:26:09 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Raymond Heckert
2002-05-07 10:04:42 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Marcus & Eva
2002-05-07 18:48:43 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Jon Elson
2002-05-07 22:05:08 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Brian
2002-05-08 17:01:15 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Dave Engvall
2002-06-21 22:21:30 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod
Jon Elson
2002-06-21 22:57:05 UTC
Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod