CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod

Posted by Brian
on 2002-05-06 19:04:28 UTC
Hi, stellite is a material simular to tungsten carbide in usage. I see it
used in engine valve seats, bandsaw blades for resaw, also many of the
"carbide " wood saw blades may be stellite. I think Rexall lathe bits were
made of stellite also. It is somewhat softer than tungsten carbide but seems
to hold up well for wood saws. Stellite has been around for many years. cul
brian f.
----- Original Message -----
From: "Peter Homann" <peter.homann@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, May 06, 2002 6:09 PM
Subject: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod


> Hi,
>
> Does anybody know what this is and is it useful? I can get a couple of
> pieces.
>
> Thanks.
>
>
> Peter Homann
> <mailto:peter.homann@...>
> Work : +61 3 8530-7755
> Adacel Technologies Ltd Fax : +61 3 9596-2960
> 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile : 0421 601665
> http://www.adacel.com.au Australian Software Engineering Excellence
>
>
> > -----Original Message-----
> > From: Peter Homann [mailto:peter.homann@...]
> > Sent: Tuesday, 7 May 2002 7:35 AM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: RE: [CAD_CAM_EDM_DRO] HP 7475A
> >
> >
> > Paul,
> >
> > Thanks for your comments. Maybe the idea isn't crazy after all. It has
> > inspired me to start the project. Do you have any more
> > information to add?
> >
> > Thanks,
> >
> > Peter Homann
> > <mailto:peter.homann@...>
> > Work : +61 3 8530-7755
> > Adacel Technologies Ltd Fax : +61 3
> > 9596-2960
> > 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile :
> > 0421 601665
> > http://www.adacel.com.au Australian Software Engineering
> > Excellence
> >
> >
> > > -----Original Message-----
> > > From: Paul Weber [mailto:pbweber@...]
> > > Sent: Monday, 6 May 2002 5:04 PM
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: Re: [CAD_CAM_EDM_DRO] HP 7475A
> > >
> > >
> > > Pete,
> > > The firm I just retired from used that method for production
> > > for years. We
> > > found that the pin carrier couldn't support the paste syringe
> > > and when we
> > > placed the syringe outboard and run a hose to the needle the
> > > flux would
> > > separate from the paste. Our solution was to replace the pin
> > > carrier with a
> > > tiny slide and air cylinder that would lower the paste needle
> > > on demand.
> > > Paul Weber
> > > ----- Original Message -----
> > > From: "Peter Homann" <peter.homann@...>
> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > Sent: Sunday, May 05, 2002 9:53 PM
> > > Subject: RE: [CAD_CAM_EDM_DRO] HP 7475A
> > >
> > >
> > > > If I can get hold of one of these plotters I'm going to try
> > > ands make a
> > > > solder paste dispenser machine for SMT pcbs. The idea is to use a
> > > commercial
> > > > solder paste dispenser such as;
> > > > http://www.zeph.com/zt-5100.htm
> > > >
> > > > The dispensing nozzle should be light enough. All I need to
> > > go now is find
> > > a
> > > > source for the plotter in Oz. (hint, hint)
> > > >
> > > > Cheers,
> > > >
> > > > Peter Homann
> > > > <mailto:peter.homann@...>
> > > > Work : +61 3 8530-7755
> > > > Adacel Technologies Ltd Fax : +61
> > > 3 9596-2960
> > > > 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile :
> > > 0421 601665
> > > > http://www.adacel.com.au Australian Software
> > > Engineering Excellence
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider
> > this as a sister site to the CCED group, as many of the same
> > members are there, for OT subjects, that are not allowed on
> > the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@...
> > [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

eggpoodle 2002-05-05 07:55:24 UTC HP 7475A Hugh Prescott 2002-05-05 09:59:33 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Scott Hendershot 2002-05-05 10:05:20 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A wayne_j_hill 2002-05-05 10:13:23 UTC Re: HP 7475A eggpoodle 2002-05-05 10:17:51 UTC Re: HP 7475A Brian Pitt 2002-05-05 11:00:32 UTC Re: [CAD_CAM_EDM_DRO] Re: HP 7475A Hugh Prescott 2002-05-05 12:09:14 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Doug Harrison 2002-05-05 13:56:54 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A dave_ace_me 2002-05-05 17:39:16 UTC a good use for a HP 7475A Henry H. Armstrong 2002-05-05 20:50:59 UTC Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A Peter Homann 2002-05-05 20:54:17 UTC RE: [CAD_CAM_EDM_DRO] HP 7475A Paul Weber 2002-05-05 23:54:36 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A dave_ace_me 2002-05-06 04:23:50 UTC Re: a good use for a HP 7475A Raymond Heckert 2002-05-06 09:20:35 UTC Re: [CAD_CAM_EDM_DRO] a good use for a HP 7475A Peter Homann 2002-05-06 14:35:36 UTC RE: [CAD_CAM_EDM_DRO] HP 7475A Peter Homann 2002-05-06 15:09:58 UTC Stellite Super Hard Alloy Cast Rod Brian 2002-05-06 19:04:28 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Paul Weber 2002-05-06 19:11:06 UTC Re: [CAD_CAM_EDM_DRO] HP 7475A Jon Elson 2002-05-06 22:08:16 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Sven Peter 2002-05-07 06:26:09 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Raymond Heckert 2002-05-07 10:04:42 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Marcus & Eva 2002-05-07 18:48:43 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Jon Elson 2002-05-07 22:05:08 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Brian 2002-05-08 17:01:15 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Dave Engvall 2002-06-21 22:21:30 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod Jon Elson 2002-06-21 22:57:05 UTC Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod