Re: [CAD_CAM_EDM_DRO] Stellite Super Hard Alloy Cast Rod

Hello Peter,
Stellite are the tips on wood band saws!
The band is simple spring steel and on the tips you hard solder or
acetylene weld the stellite.
No idea what kind of metal it is.
Later you grind simply the tooth form you need.
Good luck
Sven Peter


Peter Homann wrote:

>
> Hi,
>
> Does anybody know what this is and is it useful? I can get a couple of
> pieces.
>
> Thanks.
>
> Peter Homann
> <mailto:peter.homann@...>
> Work : +61 3 8530-7755
> Adacel Technologies Ltd Fax : +61 3 9596-2960
> 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile : 0421 601665
> http://www.adacel.com.au Australian Software Engineering Excellence
>
> > -----Original Message-----
> > From: Peter Homann [mailto:peter.homann@...]
> > Sent: Tuesday, 7 May 2002 7:35 AM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: RE: [CAD_CAM_EDM_DRO] HP 7475A
> >
> >
> > Paul,
> >
> > Thanks for your comments. Maybe the idea isn't crazy after all. It has
> > inspired me to start the project. Do you have any more
> > information to add?
> >
> > Thanks,
> >
> > Peter Homann
> > <mailto:peter.homann@...>
> > Work : +61 3 8530-7755
> > Adacel Technologies Ltd Fax : +61 3
> > 9596-2960
> > 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile :
> > 0421 601665
> > http://www.adacel.com.au Australian Software Engineering
> > Excellence
> >
> >
> > > -----Original Message-----
> > > From: Paul Weber [mailto:pbweber@...]
> > > Sent: Monday, 6 May 2002 5:04 PM
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: Re: [CAD_CAM_EDM_DRO] HP 7475A
> > >
> > >
> > > Pete,
> > > The firm I just retired from used that method for production
> > > for years. We
> > > found that the pin carrier couldn't support the paste syringe
> > > and when we
> > > placed the syringe outboard and run a hose to the needle the
> > > flux would
> > > separate from the paste. Our solution was to replace the pin
> > > carrier with a
> > > tiny slide and air cylinder that would lower the paste needle
> > > on demand.
> > > Paul Weber
> > > ----- Original Message -----
> > > From: "Peter Homann" <peter.homann@...>
> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > Sent: Sunday, May 05, 2002 9:53 PM
> > > Subject: RE: [CAD_CAM_EDM_DRO] HP 7475A
> > >
> > >
> > > > If I can get hold of one of these plotters I'm going to try
> > > ands make a
> > > > solder paste dispenser machine for SMT pcbs. The idea is to use a
> > > commercial
> > > > solder paste dispenser such as;
> > > > http://www.zeph.com/zt-5100.htm
> > > >
> > > > The dispensing nozzle should be light enough. All I need to
> > > go now is find
> > > a
> > > > source for the plotter in Oz. (hint, hint)
> > > >
> > > > Cheers,
> > > >
> > > > Peter Homann
> > > > <mailto:peter.homann@...>
> > > > Work : +61 3 8530-7755
> > > > Adacel Technologies Ltd Fax : +61
> > > 3 9596-2960
> > > > 250 Bay St, Brighton 3186, VIC, AUSTRALIA Mobile :
> > > 0421 601665
> > > > http://www.adacel.com.au Australian Software
> > > Engineering Excellence
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider
> > this as a sister site to the CCED group, as many of the same
> > members are there, for OT subjects, that are not allowed on
> > the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@...
> > [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/