Re: DeskWinNC vs Flashcut?
Posted by
aspaguy
on 2002-05-23 19:50:18 UTC
I asked these same questions a few months back and started a good
thread on the subject. Dan Mauch Posted a favorable article he had
written on DeskwinNC. Chris had a lot of good things to say about
flashcut. He gave a lot of details of things he liked about flashcut,
but on research, deskwin boasts many of the same features for a lot
less money. I suspect flashcut is a more refined version of the same
theory. I plan to try deskwin myself, as my cash comes kinda hard. Do
a search for deskwin vs flashcut. It will prove very informative.
Master 5 is also briefly dicussed as a great alternative and The
newer version is supposed to be even better. By the way, what is your
application?
Happy reading,
Dale.
-- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
thread on the subject. Dan Mauch Posted a favorable article he had
written on DeskwinNC. Chris had a lot of good things to say about
flashcut. He gave a lot of details of things he liked about flashcut,
but on research, deskwin boasts many of the same features for a lot
less money. I suspect flashcut is a more refined version of the same
theory. I plan to try deskwin myself, as my cash comes kinda hard. Do
a search for deskwin vs flashcut. It will prove very informative.
Master 5 is also briefly dicussed as a great alternative and The
newer version is supposed to be even better. By the way, what is your
application?
Happy reading,
Dale.
-- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
> I have been told that there is a known issue with circular moves ifthe axes
> do not have the same steps per inch. I have not run into thisproblem
> personally as my machine has equal steps on X and Y. Also thecontroller is
> 3 axis only. I have tested with it, but keep going back to EMC as mytrain does
> favorite, but I am using Gecko G320 drives where the EMC pulse
> not cause a problem. If I was using steppers my answer may bedifferent. I
> have no experience with Flashcut.
>
> Tim
> [Denver, CO]
> Stepper motors, drives, and encoders
> http://www.KTMarketing.com/CNC.html
>
> ----- Original Message -----
>
> > Hi all,
> >
> > Does anyone have any experience with DeskWinNC?
> > How does it compare to Flashcut or EMC?
> > Any info would be greatly appreciated!
> >
> > Regards,
> > Peter Leijnen
> > Leijnen Engineering
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Discussion Thread
pleijnen
2002-05-23 08:54:03 UTC
DeskWinNC vs Flashcut?
Tim Goldstein
2002-05-23 09:05:25 UTC
Re: [CAD_CAM_EDM_DRO] DeskWinNC vs Flashcut?
Jim Avey
2002-05-23 10:32:50 UTC
RE: [CAD_CAM_EDM_DRO]floating z axis
JanRwl@A...
2002-05-23 12:08:45 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
JanRwl@A...
2002-05-23 12:10:14 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
wanliker@a...
2002-05-23 12:10:57 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
bwrfromuk
2002-05-23 12:40:34 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
JanRwl@A...
2002-05-23 12:50:07 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Bill Vance
2002-05-23 13:34:02 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Jim Avey
2002-05-23 13:34:39 UTC
RE: [CAD_CAM_EDM_DRO]floating z axis
Les Newell
2002-05-23 14:20:08 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Jim Avey
2002-05-23 14:34:54 UTC
RE: [CAD_CAM_EDM_DRO]floating z axis
William Scalione
2002-05-23 16:09:42 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
waynegramlich
2002-05-23 16:34:01 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
turbulatordude
2002-05-23 18:31:46 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
JanRwl@A...
2002-05-23 19:00:13 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
aspaguy
2002-05-23 19:50:18 UTC
Re: DeskWinNC vs Flashcut?
Chris L
2002-05-23 20:37:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskWinNC vs Flashcut?
Chris L
2002-05-23 20:56:01 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Jon Elson
2002-05-23 21:40:49 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Nic van der Walt
2002-05-24 01:11:49 UTC
RE: [CAD_CAM_EDM_DRO]floating z axis
bjammin@i...
2002-05-24 05:05:05 UTC
tape, babay
bjammin@i...
2002-05-24 05:09:38 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
bwrfromuk
2002-05-24 08:29:10 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
JanRwl@A...
2002-05-24 08:49:33 UTC
Re: [CAD_CAM_EDM_DRO] tape, babay
JanRwl@A...
2002-05-24 08:53:20 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
reed_irion
2002-05-24 10:25:09 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Alan Marconett KM6VV
2002-05-24 11:06:02 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Nic van der Walt
2002-05-24 11:56:58 UTC
RE: [CAD_CAM_EDM_DRO]floating z axis
Alan Marconett KM6VV
2002-05-24 12:51:11 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
Alan Marconett KM6VV
2002-05-24 13:31:05 UTC
Re: [CAD_CAM_EDM_DRO]floating z axis
bjammin@i...
2002-05-24 15:25:13 UTC
Re: [CAD_CAM_EDM_DRO] tape, babay