CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Conversion

Posted by Dan Statman
on 2002-06-21 04:17:59 UTC
Terry,

The correct metric to imperial conversion is 1 inch is EXACTLY
25.4000000000000 mm. This is not a rounded off number and has a
theoretically infinite number of significant digits. The 1.609 km per mile
has only 4 sig-fig and is an approximation which is why it changes depending
on the precision to which the source reports this value. Use 25.4 mm per
inch as the exact value and you cannot go wrong.

Finally something I know about to respond to on this list, ;-).

Daniel J. Statman, Statman Designs
www.statmandesigns.com


----- Original Message -----
From: "James Owens" <wotisname@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, June 21, 2002 6:45 AM
Subject: [CAD_CAM_EDM_DRO] Conversion


> Hi,
>
> I'm working on a DRO and am having some confusion over the conversion of
> metric units to inches and back again. The device should be able to read
> glass scales down to 0.001mm or 1 micron so it is important to get this
> right.
>
> I have always used 1" = 25.4 mm but on trying to work it out with a little
> more accuracy I find that an English mile = 1.609 kilometres or 1" =
> 25.39457071 mm. but this figure changes depending on who it is coming
from.
>
> Does the list have any opinions on this.
>
> Regards,
>
> Terry
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

James Owens 2002-06-21 03:49:05 UTC Conversion Dan Statman 2002-06-21 04:17:59 UTC Re: [CAD_CAM_EDM_DRO] Conversion paul_alz 2002-06-21 08:28:58 UTC Re: Conversion afogassa 2002-06-21 08:29:33 UTC Re: Conversion Jon Elson 2002-06-21 10:11:51 UTC Re: [CAD_CAM_EDM_DRO] Conversion mariss92705 2002-06-21 10:26:10 UTC Re: Conversion Dave Lantz 2002-06-21 10:28:50 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 10:39:04 UTC Re: Conversion Dave Lantz 2002-06-21 10:43:12 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Carlos Guillermo 2002-06-21 11:22:13 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Bill Vance 2002-06-21 11:31:31 UTC Re: [CAD_CAM_EDM_DRO] Conversion Dan Statman 2002-06-21 13:00:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Doug Harrison 2002-06-21 15:27:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Steve Blackmore 2002-06-21 16:03:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-21 16:40:20 UTC Re: [CAD_CAM_EDM_DRO] Conversion JanRwl@A... 2002-06-21 16:50:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 16:54:00 UTC Re: Conversion mariss92705 2002-06-21 16:57:51 UTC Re: Conversion paul_alz 2002-06-21 17:12:29 UTC Re: Conversion James Owens 2002-06-21 17:35:35 UTC Re: [CAD_CAM_EDM_DRO] Conversion mayfieldtm 2002-06-21 19:19:57 UTC Re: [CAD_CAM_EDM_DRO] Conversion vavaroutsos 2002-06-21 21:04:48 UTC Re: Conversion Brian Pitt 2002-06-21 22:46:45 UTC Re: [CAD_CAM_EDM_DRO] Conversion bjammin@i... 2002-06-22 06:20:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-22 20:44:58 UTC Re: [CAD_CAM_EDM_DRO] Conversion Steve Blackmore 2002-06-23 03:42:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion