CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Conversion

Posted by Doug Harrison
on 2002-06-21 15:27:13 UTC
From: Dan Statman <dan.statman@...>
>
The true and accurate conversion for mm to inch is 25.4 mm per 1 inch,
EXACTLY. To the millionth or further decimal place.
>

From: "mariss92705" <mariss92705@...>
>
I looked it up and I got 25.399999999999987300000000000006 mm equals 1".
Seems 2.54 is accurate to 16 places.
>

I suppose it depends on whether that Cesium bar thing was having a good day
or a bad day.)

Now for a real puzzler. Why do some texts give absolute zero as -273.15C
and others show it as -273.16C?

Doug

Discussion Thread

James Owens 2002-06-21 03:49:05 UTC Conversion Dan Statman 2002-06-21 04:17:59 UTC Re: [CAD_CAM_EDM_DRO] Conversion paul_alz 2002-06-21 08:28:58 UTC Re: Conversion afogassa 2002-06-21 08:29:33 UTC Re: Conversion Jon Elson 2002-06-21 10:11:51 UTC Re: [CAD_CAM_EDM_DRO] Conversion mariss92705 2002-06-21 10:26:10 UTC Re: Conversion Dave Lantz 2002-06-21 10:28:50 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 10:39:04 UTC Re: Conversion Dave Lantz 2002-06-21 10:43:12 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Carlos Guillermo 2002-06-21 11:22:13 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Bill Vance 2002-06-21 11:31:31 UTC Re: [CAD_CAM_EDM_DRO] Conversion Dan Statman 2002-06-21 13:00:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Doug Harrison 2002-06-21 15:27:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Steve Blackmore 2002-06-21 16:03:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-21 16:40:20 UTC Re: [CAD_CAM_EDM_DRO] Conversion JanRwl@A... 2002-06-21 16:50:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 16:54:00 UTC Re: Conversion mariss92705 2002-06-21 16:57:51 UTC Re: Conversion paul_alz 2002-06-21 17:12:29 UTC Re: Conversion James Owens 2002-06-21 17:35:35 UTC Re: [CAD_CAM_EDM_DRO] Conversion mayfieldtm 2002-06-21 19:19:57 UTC Re: [CAD_CAM_EDM_DRO] Conversion vavaroutsos 2002-06-21 21:04:48 UTC Re: Conversion Brian Pitt 2002-06-21 22:46:45 UTC Re: [CAD_CAM_EDM_DRO] Conversion bjammin@i... 2002-06-22 06:20:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-22 20:44:58 UTC Re: [CAD_CAM_EDM_DRO] Conversion Steve Blackmore 2002-06-23 03:42:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion