CAD CAM EDM DRO - Yahoo Group Archive

Re: Conversion

Posted by paul_alz
on 2002-06-21 17:12:29 UTC
Doug,

It's some gobble-de-gook about the triple point of water..... when
it's referenced to Kelvin it's 273.16 but when referenced to Celcius
it's 273.15..... and they do mention the 0.01 K difference !! I
don't care, my windscreen wipers never seem to work at that
temperature anyway ;-)

Paul

--- In CAD_CAM_EDM_DRO@y..., "Doug Harrison" <prototype@c...> wrote:
> From: Dan Statman <dan.statman@r...>
> >
> The true and accurate conversion for mm to inch is 25.4 mm per 1
inch,
> EXACTLY. To the millionth or further decimal place.
> >
>
> From: "mariss92705" <mariss92705@y...>
> >
> I looked it up and I got 25.399999999999987300000000000006 mm
equals 1".
> Seems 2.54 is accurate to 16 places.
> >
>
> I suppose it depends on whether that Cesium bar thing was having a
good day
> or a bad day.)
>
> Now for a real puzzler. Why do some texts give absolute zero as -
273.15C
> and others show it as -273.16C?
>
> Doug

Discussion Thread

James Owens 2002-06-21 03:49:05 UTC Conversion Dan Statman 2002-06-21 04:17:59 UTC Re: [CAD_CAM_EDM_DRO] Conversion paul_alz 2002-06-21 08:28:58 UTC Re: Conversion afogassa 2002-06-21 08:29:33 UTC Re: Conversion Jon Elson 2002-06-21 10:11:51 UTC Re: [CAD_CAM_EDM_DRO] Conversion mariss92705 2002-06-21 10:26:10 UTC Re: Conversion Dave Lantz 2002-06-21 10:28:50 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 10:39:04 UTC Re: Conversion Dave Lantz 2002-06-21 10:43:12 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Carlos Guillermo 2002-06-21 11:22:13 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversion Bill Vance 2002-06-21 11:31:31 UTC Re: [CAD_CAM_EDM_DRO] Conversion Dan Statman 2002-06-21 13:00:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Doug Harrison 2002-06-21 15:27:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion Steve Blackmore 2002-06-21 16:03:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-21 16:40:20 UTC Re: [CAD_CAM_EDM_DRO] Conversion JanRwl@A... 2002-06-21 16:50:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion mariss92705 2002-06-21 16:54:00 UTC Re: Conversion mariss92705 2002-06-21 16:57:51 UTC Re: Conversion paul_alz 2002-06-21 17:12:29 UTC Re: Conversion James Owens 2002-06-21 17:35:35 UTC Re: [CAD_CAM_EDM_DRO] Conversion mayfieldtm 2002-06-21 19:19:57 UTC Re: [CAD_CAM_EDM_DRO] Conversion vavaroutsos 2002-06-21 21:04:48 UTC Re: Conversion Brian Pitt 2002-06-21 22:46:45 UTC Re: [CAD_CAM_EDM_DRO] Conversion bjammin@i... 2002-06-22 06:20:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion JanRwl@A... 2002-06-22 20:44:58 UTC Re: [CAD_CAM_EDM_DRO] Conversion Steve Blackmore 2002-06-23 03:42:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversion