Re: Power Supply
Posted by
studleylee
on 2002-07-31 17:11:48 UTC
Hi,
I dont think you could go wrong with the 'regular' transformer page
from Jan Rowland:
http://members.tripod.com/~schematics/xform/xformer4.htm
And just go conservative on the numbers derived.
-Lee
I dont think you could go wrong with the 'regular' transformer page
from Jan Rowland:
http://members.tripod.com/~schematics/xform/xformer4.htm
And just go conservative on the numbers derived.
-Lee
--- In CAD_CAM_EDM_DRO@y..., "kilroy2k1" <tszaran@c...> wrote:
> --- In CAD_CAM_EDM_DRO@y..., <MIKEC@W...> wrote:
> > Look on the web for toroid transformers. There are articals that
> define the
> > wire gage and # turns for various power levels and ratios. Good
> luck, Mike
> > Carpenter
>
> Thanks Mike, but after going through about 320 sites so far i find
no
> info of usefull value. If anyone would happen to come across such
> info please pass the link on.
>
> Thanks again.
> Tom S.
Discussion Thread
Ozzie@h...
2000-10-01 06:35:33 UTC
Power Supply
Jon Elson
2000-10-01 22:09:00 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
Ozzie@h...
2000-11-19 20:01:57 UTC
Power Supply
Carlos Guillermo
2001-12-30 11:01:48 UTC
Power Supply
allan_reinhard
2001-12-30 12:55:37 UTC
Re: Power Supply
ka1bbg
2001-12-30 18:47:33 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
macfool68
2002-04-19 23:20:04 UTC
Re: Power Supply
Ray Henry
2002-04-20 05:32:11 UTC
Re: Re: Power Supply
Bill Vance
2002-04-20 12:30:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Power Supply
kilroy2k1
2002-07-29 20:11:21 UTC
Power Supply
mariss92705
2002-07-29 20:44:53 UTC
Re: Power Supply
MIKEC@W...
2002-07-29 21:29:05 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
JanRwl@A...
2002-07-30 08:28:39 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
caudlet
2002-07-30 15:34:43 UTC
Re: Power Supply
kilroy2k1
2002-07-30 15:38:43 UTC
Re: Power Supply
caudlet
2002-07-30 16:14:54 UTC
Re: Power Supply
Doug Fortune
2002-07-30 19:30:24 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
MIKEC@W...
2002-07-30 20:56:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
kilroy2k1
2002-07-31 16:42:37 UTC
Re: Power Supply
studleylee
2002-07-31 17:11:48 UTC
Re: Power Supply
Jon Elson
2002-07-31 20:23:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
JanRwl@A...
2002-07-31 21:58:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
JanRwl@A...
2002-07-31 22:20:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
studleylee
2002-08-01 09:41:38 UTC
Re: Power Supply
bdrmachine
2002-09-02 06:42:45 UTC
Power Supply
Robert Campbell
2002-09-02 07:17:15 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
studleylee
2002-09-02 17:36:14 UTC
Re: Power Supply
bdrmachine
2002-09-03 14:18:45 UTC
Re: Power Supply
Doug Fortune
2002-12-14 17:07:58 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
C.S. Mo
2002-12-14 17:37:42 UTC
Re(2): [CAD_CAM_EDM_DRO] Power Supply
Raymond Heckert
2002-12-14 22:12:38 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
rpbfire
2003-11-20 14:26:17 UTC
Power Supply
brouwer@e...
2003-11-20 17:38:29 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
Jon Elson
2003-11-20 22:00:10 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
rpbfire
2003-11-21 06:58:00 UTC
Re: Power Supply
rpbfire
2003-11-23 06:12:57 UTC
Re: Power Supply
Fernando
2004-01-31 19:30:17 UTC
Power Supply
Raymond Heckert
2004-02-02 20:34:37 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
John Delaney
2004-02-03 17:16:57 UTC
Re: Power Supply
claudinei vilela
2004-02-04 07:57:24 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
John Johnson
2004-02-04 13:21:44 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
Fernando
2004-02-05 09:14:48 UTC
Re: Power Supply
Ron K
2004-07-02 18:49:28 UTC
Power Supply
Robert Campbell
2004-07-02 20:07:27 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
caudlet
2004-07-02 20:18:12 UTC
Re: Power Supply
Ron K
2004-07-02 20:18:56 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
Ron K
2004-07-02 20:44:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
Jon Elson
2004-07-02 23:33:38 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply
ballendo
2004-07-03 07:38:16 UTC
Re: Power Supply
Ron K
2004-07-03 10:03:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
Larry Wright
2004-07-05 18:51:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
John Delaney
2004-07-05 19:33:39 UTC
Re: Power Supply
John Delaney
2004-07-05 19:45:41 UTC
Re: Power Supply
David A. Frantz
2004-07-05 21:31:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
Jon Elson
2004-07-06 10:35:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply
Fred Smith
2004-07-06 13:17:01 UTC
Transformer, was Re: Power Supply
Rose, Gary
2004-07-13 05:34:58 UTC
Re: Re: Power Supply
Dan Mauch
2004-07-13 06:19:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Power Supply
Ron Ginger
2005-08-04 14:51:40 UTC
Power Supply
caudlet
2005-08-04 14:59:46 UTC
Re: Power Supply