CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: EDM

Posted by Steve
on 2002-12-13 22:24:13 UTC
From: <davemucha@...>

>In my reading, the whole idea of electrical discharge is that the
>electrical discharge turns the metal to be removed into a plasma.

some gets turned into a gas, most melts and gets flushed out as little
balls (so small it's really more like a powder then balls)

> I
> am not sure (yet) what happens as the part is turned into plasma, if
> the metal expands and that is what 'pushes' it from the cut. or if
> the elecrtrolite somehow helps the metal removal.

The electrolite fluid needs to flush the metal out of the cut. Good
flushing is critical to a good burn.

Discussion Thread

Tim Goldstein 1999-06-19 23:19:54 UTC EDM George Potter 1999-06-20 06:41:08 UTC Re: EDM Pete Jarman 1999-06-20 10:41:25 UTC Re: EDM Tim Goldstein 1999-06-21 07:43:01 UTC Re: EDM psp@x... 1999-06-21 08:51:38 UTC Re: EDM Tim Goldstein 1999-07-16 15:37:43 UTC Re: EDM TADGUNINC@x... 1999-07-16 18:11:51 UTC Re: EDM Scott Acorn 1999-07-17 17:07:53 UTC Re: EDM Scott Acorn 1999-07-17 18:09:08 UTC Re: EDM Jon Anderson 1999-07-17 18:14:31 UTC Re: EDM Tim Goldstein 1999-07-18 15:26:09 UTC RE: EDM Tim Goldstein 1999-07-18 15:32:47 UTC RE: EDM Mo 1999-07-18 14:41:03 UTC Re: EDM Tim Goldstein 1999-07-18 17:22:08 UTC RE: EDM J Catmull 1999-07-28 08:06:45 UTC Re: EDM Brian Fairey 2000-02-16 16:36:26 UTC EDM Jon Elson 2000-02-16 22:03:02 UTC Re: EDM tommy40010 2002-12-03 05:58:56 UTC EDM Jon Elson 2002-12-03 10:33:03 UTC Re: [CAD_CAM_EDM_DRO] EDM Tommy Sullivan 2002-12-03 16:13:25 UTC Re: [CAD_CAM_EDM_DRO] EDM Jon Elson 2002-12-13 00:17:14 UTC Re: [CAD_CAM_EDM_DRO] EDM JanRwl@A... 2002-12-13 09:55:23 UTC Re: [CAD_CAM_EDM_DRO] EDM turbulatordude <davemucha@j... 2002-12-13 10:23:49 UTC Re: EDM wanliker@a... 2002-12-13 16:37:27 UTC Re: [CAD_CAM_EDM_DRO] EDM Steve 2002-12-13 22:24:13 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM Hoyt McKagen 2002-12-14 04:47:28 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM wanliker@a... 2002-12-14 08:46:54 UTC EDM wanliker@a... 2002-12-14 09:18:10 UTC EDM Jay Hayes 2002-12-14 10:27:03 UTC Re: [CAD_CAM_EDM_DRO] EDM JanRwl@A... 2002-12-14 18:36:23 UTC Re: [CAD_CAM_EDM_DRO] EDM RichD 2002-12-14 19:04:24 UTC Re: [CAD_CAM_EDM_DRO] EDM JanRwl@A... 2002-12-14 20:21:38 UTC Re: [CAD_CAM_EDM_DRO] EDM Ian W. Wright 2002-12-17 02:17:50 UTC Re: EDM Steve 2002-12-17 07:47:04 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM