Re: [CAD_CAM_EDM_DRO] Re: Motors
Posted by
alex
on 2003-04-25 15:53:52 UTC
Strange thing is that it says stepping motor on the label...
I only had 15 minutes then - will allocate a good hour next time.
Regards, Alex
I only had 15 minutes then - will allocate a good hour next time.
Regards, Alex
----- Original Message -----
From: turbulatordude <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, April 25, 2003 6:35 PM
Subject: [CAD_CAM_EDM_DRO] Re: Motors
> 3 wires ? sounds like Uno-polar, maybe capacitor run motors with a
> constant speed ?
>
> just guessing (really, I just wanted to be the first to say uno-polar)
>
> Dave
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "alex" <telecomt@t...> wrote:
> > Alan,
> > thank you for your reply.
> > I only detected 3 wires coming out of SS50s.
> > Does it mean that they are unipolar?
> > 20V and 30V motors are PM DC. They are quite heavy, with approx.
> Dia. 5/8
> > shaft.
> > Regards, Alex
> > ----- Original Message -----
> > From: Alan Marconett KM6VV <KM6VV@a...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Friday, April 25, 2003 4:31 PM
> > Subject: Re: [CAD_CAM_EDM_DRO] Motors
> >
> >
> > > Hi Alex,
> > >
> > > SS50's are OLD! As long as they're bipolar, they will work
> (unipolar
> > > could too, but fewer high end drivers available). Much better
> motors
> > > available now, of course.
> > >
> > > The 20V & 30V figures on the motors doesn't sound too
> interesting. A
> > > few volts, 2-5V or so, is to be preferred, so that a 15 - 20X or
> so
> > > supply voltage doesn't get too high (Geckos like < 80V).
> > >
> > > HTH
> > >
> > > Alan KM6VV
> > >
> > > alex wrote:
> > > >
> > > > Hi,
> > > > I stumbled into some used motors - can be bought very
> inexpensively.
> > > > Slo-Syn 600 oz-n, SS50-P2.
> > > > Another appears to be DC by Ametek - says 30 VDC.
> > > > Also - no name, but quite big - says 20V DC.
> > > > Can you please give me an idea if these motors are good for
> anything?
> > > > Regards, Alex
> > > >
> > > > Addresses:
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
PTENGIN@x...
1999-07-28 11:07:25 UTC
Re: Re: Motors
Brian Fairey
1999-07-28 11:26:11 UTC
Re: Re: Motors
Jon Elson
1999-07-28 13:35:08 UTC
Re: Re: Motors
PTENGIN@x...
1999-07-28 15:34:17 UTC
Re: Re: Motors
Robert Campbell
1999-07-28 19:37:51 UTC
Re: Re: Motors
Woody
2001-04-05 16:29:01 UTC
Motors
mariss92705@y...
2001-04-05 16:52:24 UTC
Re: Motors
Woody
2001-04-05 16:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Randy Gordon-Gilmore
2001-04-05 17:27:49 UTC
Re: [CAD_CAM_EDM_DRO] Motors
Alan Marconett KM6VV
2001-04-05 17:29:27 UTC
Re: [CAD_CAM_EDM_DRO] Motors
Woody
2001-04-05 17:39:03 UTC
Re: [CAD_CAM_EDM_DRO] Motors
JanRwl@A...
2001-04-05 18:00:58 UTC
Re: [CAD_CAM_EDM_DRO] Motors
wanliker@a...
2001-04-05 20:41:56 UTC
Re: [CAD_CAM_EDM_DRO] Motors
mariss92705@y...
2001-04-05 21:05:55 UTC
Re: Motors
Jon Elson
2001-04-05 21:42:16 UTC
Re: [CAD_CAM_EDM_DRO] Motors
Tom Eldredge
2001-04-06 04:12:24 UTC
Re: [CAD_CAM_EDM_DRO] Motors
ballendo@y...
2001-04-06 04:58:49 UTC
Re: Motors
Woody
2001-04-06 06:53:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Joe Vicars
2001-04-06 06:57:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
e.heritage@b...
2001-04-06 07:04:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Gene
2002-07-11 23:49:09 UTC
Motors
the_dutros
2002-07-12 05:17:10 UTC
Re: Motors
Gene
2002-07-12 11:04:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Tim Goldstein
2002-07-12 11:23:27 UTC
Re: [CAD_CAM_EDM_DRO]Motors
JanRwl@A...
2002-07-12 20:14:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
mayfieldtm
2002-07-12 23:05:35 UTC
Re: Motors
alex
2003-04-25 11:33:17 UTC
Re: [CAD_CAM_EDM_DRO] Motors
Alan Marconett KM6VV
2003-04-25 13:32:10 UTC
Re: [CAD_CAM_EDM_DRO] Motors
alex
2003-04-25 13:37:57 UTC
Re: [CAD_CAM_EDM_DRO] Motors
JanRwl@A...
2003-04-25 14:28:46 UTC
Re: [CAD_CAM_EDM_DRO] Motors
alex
2003-04-25 14:56:09 UTC
Re: [CAD_CAM_EDM_DRO] Motors
turbulatordude
2003-04-25 15:35:12 UTC
Re: Motors
alex
2003-04-25 15:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
alex
2003-04-25 16:00:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
JanRwl@A...
2003-04-25 16:34:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
km6vv
2003-04-26 10:32:59 UTC
Re: Motors
alex
2003-04-26 14:38:25 UTC
Re: [CAD_CAM_EDM_DRO] Motors
alex
2003-04-29 10:47:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Chris
2003-04-29 18:20:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
Jon Elson
2003-04-29 22:38:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
mayfieldtm
2003-04-30 09:14:47 UTC
Re: Motors
Chris
2003-04-30 17:38:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motors
onecooltoolfool
2003-05-04 18:36:39 UTC
Motors
JanRwl@A...
2003-05-04 19:36:13 UTC
Re: [CAD_CAM_EDM_DRO] Motors
Jon Elson
2003-05-04 22:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Motors
onecooltoolfool
2003-05-05 04:01:26 UTC
Re: Motors