CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Motors

on 1999-07-28 19:37:51 UTC
Brian,

For chopper type drives, the voltage is limited to the max voltage that the
driver will support. For example, the Pacific Scientific 6410 driver are
limited to 70 volts.

Bob Campbell

----- Original Message -----
From: <PTENGIN@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Wednesday, July 28, 1999 5:34 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Motors


> From: PTENGIN@...
>
> In a message dated 7/28/99 8:27:57 AM Hawaiian Standard Time,
> bfairey@... writes:
>
> << From: Brian Fairey <bfairey@...>
>
> I read somewhere that you can drive these motors at up to 10 times their
> rated voltage?
> Brian.
>
>
> > HI All,
> > I recently took delivery of some motors Dan at Camtronics was
selling.
> > They are Oriental Motors brand Vextas, beautiful motors. More
importantly,
> > though they are NEMA 34, they have 1/2" shafts on them.
> >
> > Have a good one - Peter
>
> Brian, I am running them at 40 volts, 5 amps. I can run them at up to 7
amps.
> PT
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Start a new ONElist list & you can WIN great prizes!
> For details on ONElist's NEW FRIENDS & FAMILY program, go to
> http://www.onelist.com/info/onereachsplash3.html
>
> ------------------------------------------------------------------------
> Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> bill,
> List Manager
>

Discussion Thread

PTENGIN@x... 1999-07-28 11:07:25 UTC Re: Re: Motors Brian Fairey 1999-07-28 11:26:11 UTC Re: Re: Motors Jon Elson 1999-07-28 13:35:08 UTC Re: Re: Motors PTENGIN@x... 1999-07-28 15:34:17 UTC Re: Re: Motors Robert Campbell 1999-07-28 19:37:51 UTC Re: Re: Motors Woody 2001-04-05 16:29:01 UTC Motors mariss92705@y... 2001-04-05 16:52:24 UTC Re: Motors Woody 2001-04-05 16:59:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Randy Gordon-Gilmore 2001-04-05 17:27:49 UTC Re: [CAD_CAM_EDM_DRO] Motors Alan Marconett KM6VV 2001-04-05 17:29:27 UTC Re: [CAD_CAM_EDM_DRO] Motors Woody 2001-04-05 17:39:03 UTC Re: [CAD_CAM_EDM_DRO] Motors JanRwl@A... 2001-04-05 18:00:58 UTC Re: [CAD_CAM_EDM_DRO] Motors wanliker@a... 2001-04-05 20:41:56 UTC Re: [CAD_CAM_EDM_DRO] Motors mariss92705@y... 2001-04-05 21:05:55 UTC Re: Motors Jon Elson 2001-04-05 21:42:16 UTC Re: [CAD_CAM_EDM_DRO] Motors Tom Eldredge 2001-04-06 04:12:24 UTC Re: [CAD_CAM_EDM_DRO] Motors ballendo@y... 2001-04-06 04:58:49 UTC Re: Motors Woody 2001-04-06 06:53:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Joe Vicars 2001-04-06 06:57:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors e.heritage@b... 2001-04-06 07:04:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Gene 2002-07-11 23:49:09 UTC Motors the_dutros 2002-07-12 05:17:10 UTC Re: Motors Gene 2002-07-12 11:04:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Tim Goldstein 2002-07-12 11:23:27 UTC Re: [CAD_CAM_EDM_DRO]Motors JanRwl@A... 2002-07-12 20:14:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors mayfieldtm 2002-07-12 23:05:35 UTC Re: Motors alex 2003-04-25 11:33:17 UTC Re: [CAD_CAM_EDM_DRO] Motors Alan Marconett KM6VV 2003-04-25 13:32:10 UTC Re: [CAD_CAM_EDM_DRO] Motors alex 2003-04-25 13:37:57 UTC Re: [CAD_CAM_EDM_DRO] Motors JanRwl@A... 2003-04-25 14:28:46 UTC Re: [CAD_CAM_EDM_DRO] Motors alex 2003-04-25 14:56:09 UTC Re: [CAD_CAM_EDM_DRO] Motors turbulatordude 2003-04-25 15:35:12 UTC Re: Motors alex 2003-04-25 15:53:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors alex 2003-04-25 16:00:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors JanRwl@A... 2003-04-25 16:34:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors km6vv 2003-04-26 10:32:59 UTC Re: Motors alex 2003-04-26 14:38:25 UTC Re: [CAD_CAM_EDM_DRO] Motors alex 2003-04-29 10:47:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Chris 2003-04-29 18:20:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors Jon Elson 2003-04-29 22:38:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors mayfieldtm 2003-04-30 09:14:47 UTC Re: Motors Chris 2003-04-30 17:38:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Motors onecooltoolfool 2003-05-04 18:36:39 UTC Motors JanRwl@A... 2003-05-04 19:36:13 UTC Re: [CAD_CAM_EDM_DRO] Motors Jon Elson 2003-05-04 22:52:22 UTC Re: [CAD_CAM_EDM_DRO] Motors onecooltoolfool 2003-05-05 04:01:26 UTC Re: Motors